Home > edesa > edesa EHDB-6930-I Dishwasher

edesa EHDB-6930-I Dishwasher

Water Softener  
The water softener must be set manually, using the water hardness dial.  
The water softener is designed to remove minerals and salts from the water, which  
would have a detrimental or adverse effect on the operation of the appliance.  
The more minerals there are, the harder your water is.  
The softener should be adjusted according to the hardness of the water in your area.  
Your local Water Authority can advise you on the hardness of the water in your area.  
Adjusting salt consumption  
The dishwasher is designed to allow for adjustment in the amount of salt consumed  
based on the hardness of the water used. This is intended to optimise and customise  
the level of salt consumption.  
Please follow the steps below for adjustment in salt consumption.  
1. Open the door and switch on the appliance.  
2. Press the Rapid button for more than 5 seconds, when the salt indicator  
flashes means entering the water softener settings.  
set model within 60 seconds after the appliance was switched on.  
3. Press the Rapid button to select the proper set according to your local  
environment, the sets will change in the following sequence:  
H1->H2->H3->H4->H5->H6.  
4. Without operation in 5 seconds or press the Power button to complete the setup  
and exit the setup mode.  
WATER HARDNESS  
Regeneration occurs  
every X program  
Water softner  
level  
Salt consumption  
(gram/cycle)  
German  
dH  
British  
Clarke  
French  
fH  
1)  
Mmol/l  
sequence  
No regeneration  
0
0 - 5  
0 - 9  
0 - 6 0 - 0.94  
H1-> Rapid Light bright  
9
6 - 11 10 - 20 7 - 14 1.0 - 2.0  
12 - 17 21 - 30 15 - 21 2.1 - 3.0  
18 - 22 31 - 40 22 - 28 3.1 - 4.0  
23 - 34 41 - 60 29 - 42 4.1 - 6.0  
35 - 55 61 - 98 43 - 69 6.1 - 9.8  
H2-> 90 min Light bright  
H3-> 90 min, Rapid Light bright  
H4-> ECO Light bright  
10  
5
12  
20  
30  
60  
3
2
H5-> ECO, Rapid Light bright  
H6-> ECO, 90 min Light bright  
1
°
°
°
1
dH=1.25 Clarke=1.78 fH=0.178mmol/l  
The manufactory setting: H4  
1)  
Every cycle with a regeneration operation consumes additional 2.0 litres of water,  
the energy consumption increases by 0.02 kWh and the program extents by 4  
minutes.  
6
EN  
GeneralDetails
Nameedesa EHDB-6930-I Dishwasher
Makeedesa
LanguageEnglish
FiletypePDF (Download)
File size13.56 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
edesa 3706588 Dishwasher
edesa 3706588 Dishwasher

edesa EHDB-6930-I Dishwasher