Home > edesa > edesa EHDB-6930-I Dishwasher

edesa EHDB-6930-I Dishwasher

Saving Energy  
1. Pre-rinsing of tableware items leads to increased water and energy consumption  
and is not recommended.  
2. Washing tableware in a household dishwasher usually consumes less energy and  
water in the use phase than hand dishwashing when the household dishwasher is  
used according to the instructions.  
Starting A Cycle Wash  
1. Draw out the lower and upper basket, load the dishes and push them back.  
It is commended to load the lower basket first, then the upper one.  
2. Pour in the detergent.  
3. Insert the plug into the socket. The power supply refer to last page”Product fiche”.  
Make sure that the water supply is turned on to full pressure.  
4. Open the door, Press the power button, and the On/Off light will turn on.  
5. Choose a program, the response light will turn on. Then close the door, the  
dishwasher will start its cycle.  
Changing The Program Mid-cycle  
A wash cycle can only be changed if it has been running for a short time otherwise,  
the detergent may have already been released and the dishwasher may have already  
drained the wash water. If this is the case, the dishwasher needs to be reset and the  
detergent dispenser must be refilled. To reset the dishwasher, follow the  
instructions below:  
1. Open the door a little to stop the dishwasher, after the spray arm stop working,  
you can open the door completely.  
2. Press any Program button more than three seconds the machine will be in  
stand by state.  
3. You can change the program to the desired cycle setting.  
3 sec  
14  
EN  
GeneralDetails
Nameedesa EHDB-6930-I Dishwasher
Makeedesa
LanguageEnglish
FiletypePDF (Download)
File size13.56 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
edesa 3706588 Dishwasher
edesa 3706588 Dishwasher

edesa EHDB-6930-I Dishwasher