Home > ETA > eta 338290000B Dishwasher

eta 338290000B Dishwasher

EN  
IV. PRIOR USING FOR THE FIRST TIME  
Before using your dishwasher for the first time  
• Set the water softener  
• Add 1.5 Kg dishwasher salt and then full fill the salt container with water  
• Fill the rinse aid dispenser  
• Fill in detergent  
A. WATER SOFTENER  
• The water softener must be set manually, using the water hardness dial .  
• The water softener is designed to remove minerals and salts from the water, which would  
have a detrimental or adverse effect on the operation of the appliance. The higher the  
content of these minerals and salts, the harder your water is. The softener should be  
adjusted according to the hardness of the water in your area. Your local Water Authority  
can advise you on the hardness of the water in your area.  
Adjusting Salt Consumption  
The dishwasher is designed to allow for adjustment in the amount of salt consumed based  
on the hardness of the water used. This is intended to optimise and customise the level of  
salt consumption.  
1. Close the door, switch on the appliance;  
2. Within 60 seconds after the appliance was switched on press the SELF-CLEANING  
11  
button  
for more than 5 seconds to start the water softener set model. The display  
shows H3.  
3. Press the SELF-CLEANING button  
11  
to select the proper set according to your local  
environment, the sets will change in the following sequence: H3>H4>H5>H6>H1>H2>H3  
1
4. Press the POWER button  
to end the setting mode.  
Water Hardness level  
Salt  
consumption  
(gram/cycle)  
Regeneration occurs  
every x programme  
sequence 3)  
Digital display  
°dH1)  
mmol/l2)  
stalls  
0 – 5  
0 – 0.9  
1.0 – 2.0  
2.1 – 3.0  
3.1 – 4.0  
4.1 – 6.1  
6.2 – 8.0  
H1  
H2  
H3*  
H4  
H5  
H6  
0
OFF  
10  
5
6 – 11  
9
12 – 17  
18 – 22  
23 – 34  
35 – 55  
12  
20  
30  
60  
3
2
1
1) German degree of measurement for the water hardness  
2) millimol, internationel unit for water hardness  
*) factory setting  
3) Every cycle with a regeneration operation consumes additional 2 litres of water,  
the energy consumption increases by 0.02 kWh and the programme extents by 4 minutes.  
Water softener  
• The hardness of the water varies from place to place.  
• If hard water is used in the dishwasher, deposits will from on the dishes and utensils.  
• The appliance is equipped with a special softener that uses a salt specifically designed  
to eliminate lime and minerals from the water.  
EN - 78  
GeneralDetails
Nameeta 338290000B Dishwasher
MakeETA
LanguageEnglish
FiletypePDF (Download)
File size19.37 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
eta 274890000D Dishwasher
eta 274890000D Dishwasher
ETA 339490001B Dishwasher
ETA 339490001B Dishwasher
ETA 238090000C Dishwasher
ETA 238090000C Dishwasher
ETA 274890010D Dishwasher
ETA 274890010D Dishwasher
eta 239490001C Dishwasher
eta 239490001C Dishwasher
eta 239490001B Dishwasher
eta 239490001B Dishwasher
eta 238290000C Dishwasher
eta 238290000C Dishwasher

eta 338290000B Dishwasher