Home > ETA > eta 338290000B Dishwasher

eta 338290000B Dishwasher

EN  
Loading the Salt into the Softener  
• Always use salt intende d for use with dis hwasher.  
• The salt container is located beneath the rack and should be filled as follows:  
ATTENTION!  
Only uses alt specifically designed for use in dishwa shers! All other types of  
salt not specifically designed for use in a dishwas her, especially tablesalt, will  
damage the water softener. In case of damage s ca used by the use of unsui  
tabl e salt the manuf acturer does not give any warranty or is liable for any cause  
damages. Only fill withs alt just before starting one of the complete washing  
programmes. This will prevent any grains of salt or salty water, which may have  
been split, remai ni ng of the bottom of the machine for any period of time, which  
may cause corrosion. After the first wash cycle the control panel light expires .  
WARNING:  
if salt is not added, it will cause poor cleaning effect of dishes, and will produce scale.  
1.After the lower basket has been removed, unscrew and remove the cap from the salt container.  
2.Place the end of the funnel (supplied) into the hole and introduce about 1.5 kg of  
dishwasher salt.  
3.Full fill the salt container with water,It is normal for a small amount of water to come out  
of the salt container.  
4.After filling the container, screw the cap tightly back clockwise.  
5.The salt warning light will stop being after the salt container has been filled with salt.  
6.Immediately after filling the salt into the salt container, a washing program should be  
started (We suggest to use a short program). Otherwise the filter system, pump or  
other important parts ofthe machine may be damaged by salty water. This is out of  
responsibility for defects.  
NOTE  
• The salt container must be refilled when the salt warning light in 1. the control panel  
comes on. Though the salt container is filled enough, the indicator light may not black out  
before the salt fully dissolve. If there is no salt warning light in the control panel (for some  
models) , you can judge when to load the salt into the softener by the cycles that the  
dishwasher had run (see the foregoing schema ).  
• If there are spills of the salt, a soak program could be run to wipe them out.  
EN - 79  
GeneralDetails
Nameeta 338290000B Dishwasher
MakeETA
LanguageEnglish
FiletypePDF (Download)
File size19.37 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
eta 274890000D Dishwasher
eta 274890000D Dishwasher
ETA 339490001B Dishwasher
ETA 339490001B Dishwasher
ETA 238090000C Dishwasher
ETA 238090000C Dishwasher
ETA 274890010D Dishwasher
ETA 274890010D Dishwasher
eta 239490001C Dishwasher
eta 239490001C Dishwasher
eta 239490001B Dishwasher
eta 239490001B Dishwasher
eta 238290000C Dishwasher
eta 238290000C Dishwasher

eta 338290000B Dishwasher