Home > ETA > ETA 339490001B Dishwasher

ETA 339490001B Dishwasher

EN  
Dishwasher installation steps  
1. Affix the condensation strip under the work surface of cabinet.  
Please ensure the condensation strip is flush with edge of work surface.  
2. Connect the inlet hose to the cold water supply.  
3. Connect the drain hose.  
4. Connect the power cord.  
5. Place the dishwasher into position.  
6. Level the dishwasher. The rear food can be adjusted from the front of the dishwasher  
by turning the screw in the middle of the base of dishwasher use an phillips  
screwdriver (Figure 6A). To adjust the front feet, use a flat screw driver and turn the  
front feet until the dishwasher is level (Figure 6B).  
7. Install the furniture door to the outer door of the dishwasher using the brackets  
provided. Refer to the template for positioning of the brackets.  
8. Adjust the tension of the door springs by using an phillips screwdriver turning in  
a clockwise motion to tighten the left and right door springs. Failure to do this could  
cause damage to your dishwasher.  
9. The dishwasher must be secured in place. There are two ways to do this:  
A. Normal work surface:Put the installation hook into the slot of the side plane and  
secure it to the work surface with the wood screws.  
B. Marble or granite work top:Fix the side with screw.  
1
8
8
2,3,4  
5
A
B
9
A
B
6
EN - 109  
GeneralDetails
NameETA 339490001B Dishwasher
MakeETA
LanguageEnglish
FiletypePDF (Download)
File size27.09 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
eta 274890000D Dishwasher
eta 274890000D Dishwasher
ETA 238090000C Dishwasher
ETA 238090000C Dishwasher
ETA 274890010D Dishwasher
ETA 274890010D Dishwasher
eta 239490001C Dishwasher
eta 239490001C Dishwasher
eta 338290000B Dishwasher
eta 338290000B Dishwasher
eta 239490001B Dishwasher
eta 239490001B Dishwasher
eta 238290000C Dishwasher
eta 238290000C Dishwasher

ETA 339490001B Dishwasher