Home > ETA > ETA 339490001B Dishwasher

ETA 339490001B Dishwasher

EN  
Tension adjustment of the door spring  
The door springs are set at the factory to the proper tension for the outer door. If aesthetic  
wooden panel are installed, you will have to adjust the door spring tension. Rotate the  
adjusting screw to drive the adjustor to strain or relax the steel cable (see figure 5).  
Door spring tension is correct when the door remains horizontal in the fully opened position  
yet rises to a close with the slight lift of a finger.  
Figure 5 - Tension adjustment of the door spring  
Dishwasher leveling for proper operation  
1. Place a spirit level on door and rack track inside the tub as shown to check that the  
dishwasher is level.  
2. Level the dishwasher by adjusting the three levelling legs individually..  
3. When level the dishwasher, please pay attention not to let the dishwasher tip over.  
A - level Front to Back  
The maximum adjustment  
height of the feet is 50 mm.  
B
UP  
DOWN  
A
B - level side to side  
Figure 6 - Dishwasher leveling  
EN - 112  
GeneralDetails
NameETA 339490001B Dishwasher
MakeETA
LanguageEnglish
FiletypePDF (Download)
File size27.09 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
eta 274890000D Dishwasher
eta 274890000D Dishwasher
ETA 238090000C Dishwasher
ETA 238090000C Dishwasher
ETA 274890010D Dishwasher
ETA 274890010D Dishwasher
eta 239490001C Dishwasher
eta 239490001C Dishwasher
eta 338290000B Dishwasher
eta 338290000B Dishwasher
eta 239490001B Dishwasher
eta 239490001B Dishwasher
eta 238290000C Dishwasher
eta 238290000C Dishwasher

ETA 339490001B Dishwasher