GAGGENAU 400 Dishwasher
Dishwasher Connectionꢀen-us
1. Slide the supplied brackets into the
slots of the toe panel you just
attached.
6. To cover the screw heads, use the
black plastic caps.
2. To ensure that the outer toe panel is
flush with the cabinetry base,
determine the correct position for
the brackets.
3. Mark the correct position, then slide
the brackets out and bend out the
metal tab at the correct position.
D
h
e
5ꢀDishwasher Connec-
tion
D
h
e
Follow these instructions to connect
the dishwasher.
5.1ꢀInstalling the Water Inlet
Connection
The hot water heater should be set to
deliver approximately 120 °F (49 °C)
[max. 140 °F/ (60 °C)] water to the
dishwasher. Water that is too hot can
cause some detergents to lose
effectiveness. Lower water
temperatures will increase run times.
The hot water supply pressure must be
between 7.25 - 145 psi (0.5 - 10 bar).
Bending a tab ensures that the toe
panel cannot slide in further.
4. Re-insert the brackets.
5. Secure the outer toe panel with the
crosshead screws provided.
WARNING
Scalding Hazard
▶ Do not perform any work on a
pressured hot water line. Serious
injury could result. Only qualified
plumbers should perform plumbing
work. Do not attempt any work on
‒ The outer toe panel should
completely cover the rubber
apron.
17
| General | Details |
|---|---|
| Name | GAGGENAU 400 Dishwasher |
| Make | Gaggenau |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.04 MB |

Gaggenau DF264101 Dishwasher

GAGGENAU DF481100 Dishwasher

GAGGENAU DF271101F Dishwasher

GAGGENAU DF480161F Dishwasher

Gaggenau 9001923384 B Dishwasher

GAGGENAU DF261101 Dishwasher

Gaggenau DF211700 Dishwasher

GAGGENAU DF480701F Dishwasher

GAGGENAU DF481100F 400 Series Dishwasher

GAGGENAU 11029813 Fully- Dishwasher

























































