Home > GE Appliances > GE APPLIANCES GTW845 Dishwasher
GE APPLIANCES GTW845 Dishwasher
Installation Instructions
3
4
CONNECT DRAIN HOSE TO
WASHER
CONNECT WATER HOSES TO
WASHER
Remove the cap from the drain port, if present, before
installing the drain hose. It is normal for a small amount
of residual water from the factory quality test process to
drain out of the port when removing the cap.
Unplug electrical cord before installing water hoses. If
not installed, install rubber washer in one end of hot
water hose. Thread hot water hose onto connection
labeled H at top rear of washer. Hand tighten and use
pliers to tighten hoses between 1/8 and 1/4 turn beyond
hand-tight.
If not installed, install rubber washer in one end of cold
water hose C. Thread cold water hose onto connection
labeled C at top rear of washer. Hand tighten and use
pliers to tighten hoses between 1/8 and 1/4 turn beyond
hand-tight.
Port
0RYHꢀ ZDVKHUꢀ DVꢀ FORVHꢀ WRꢀ ¿QDOꢀ ORFDWLRQꢀ DVꢀ SRVVLEOHꢊꢀ
leaving room for you to make water, drain, and electrical
connections to your home.
Cap
Washer Back
Connect drain hose to drain port on back of washer. Open
clamp with pliers and slide onto hose end. Holding clamp
open, push hose end onto drain port until fully seated.
Release clamp between locating ribs on hose end. Outlet
of hose end should be oriented vertically.
Rubber
washer
Drain
hose
Rubber
washer
Drain
port
Drain
end
5
CONNECT WATER HOSES TO
OUTLET VALVES
Clamp
Determine which is HOT water line before attaching
water hoses to faucets. Traditionally, HOT faucet is on
left.
(If screen washers are not installed) With protruding
part of screen toward you, install strainer screen/rubber
washer into each of the free ends of two water hoses.
Connect hot water hose to hot water
outlet valve of your home. Hand
tighten and use pliers to tighten
hoses between 1/4 and 1/2 turn
beyond hand-tight. Open hot water
valve.
Connect cold water hose to cold
water outlet valve of your home.
Hand tighten and use pliers to
tighten hoses between 1/4 and 1/2
turn beyond hand-tight. Open cold water valve.
Check for leaks and drips at the hose couplings. Tighten
as necessary.
49-3000187 Rev. 2
23
| General | Details |
|---|---|
| Name | GE APPLIANCES GTW845 Dishwasher |
| Make | GE Appliances |
| Language | English |
| Filetype | PDF (Download) |
| File size | 13.88 MB |
(1 votes, average: 5.00 out of 5)
Loading...
GE APPLIANCES GSD2100VBB Dishwasher
GE APPLIANCES GDF550PGR Plastic Interior Dishwasher with Front Controls
GE APPLIANCES PDT755SYV/BTV UltraFresh System Dishwasher with Interior
GE APPLIANCES GDT670SGV Interior Dishwasher with Hidden Controls
GE APPLIANCES GDT650SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES PDP715SYVFS GE Profile Series Interior Dishwasher
GE APPLIANCES PDT715SYV Interior Dishwasher with Hidden Controls
GE APPLIANCES PDT705SYWFS Dishwasher
GE APPLIANCES GDT565HSYSS Energy Star Hybrid Tub Dishwasher
GE APPLIANCES GD*650-670 Series Interior Dishwasher
BOSCH SMH4HTX02G Dishwasher
Fisher and Paykel DD24DHTI9 N Dishwasher
FISHER AND PAYKEL DW60FC4X1 Dishwasher
Whirlpool WDF332PAMW Full Console Dishwasher
FISHER and PAYKEL DW24UT2I2 Series 7 Integrated Dishwasher
SIEMENS SX95Z802CE XXL iQ500 Dishwasher
BOSCH 642A Fully Dishwasher
Miele PFD 401 U Commercial Dishwasher
BOSCH SMV4HDX52Y-39 Fully Integrated Dishwasher
BOSCH SMI8ZDS81T Dishwasher