Home > GRAM > GRAM DS 4010 Dishwasher

GRAM DS 4010 Dishwasher

8.2 Spray Arms  
8.3 Drain Pump  
Make sure that the spray holes are not  
clogged and that no food waste or foreign  
object is stuck to the spray arms. If there is  
any clogging,remove the spray arms and  
clean them under water. To remove the  
upper spray arm undo the nut holding it in  
position by turning it clockwise and pulling  
it downwards. Make sure that the nut is  
properly tightened when refitting the upper  
Large food residues or foreign objects  
which were not captured by the filters may  
block the waste water pump. The rinsing  
water will then be above the filter.  
Warning Risk of cuts!  
When cleaning the waste water pump,  
ensure that you do not injure yourself on p  
ieces of broken glass or pointed  
implements.  
spray arm.  
In this case:  
1. First always disconnect the appliance  
from the power supply.  
2. Take out baskets.  
3. Remove the filters.  
4. Scoop out water, use a sponge if requi-  
red.  
5.Check the area and remove any foreign  
objects.  
6. Install filters.  
7. Re-insert baskets.  
EN - 29  
GeneralDetails
NameGRAM DS 4010 Dishwasher
MakeGRAM
LanguageEnglish
FiletypePDF (Download)
File size2.77 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

GRAM DS 4010 Dishwasher