GRAM DS 4010 Dishwasher
For all other models:
2 INSTALLATION
Cold water preferred; hot water max.
temperature 60 °C.
2.1 Machine Positioning
When positioning the machine, place it in
an area where dishes can be easily loaded
and unloaded. Do not put the machine in an
area where the ambient temperature falls
below 0°C.
2.3 Water Inlet Hose
Read all warnings located on the packaging
before removing the packaging and
positioning the machine.
Place the machine close to a water tap
and drain. Take into consideration that the
connections will not be altered once the
machine is in position.
Do not hold the machine by its door or
panel.
Leave an adequate distance around the
machine to allow ease of movement when
cleaning.
Ensure the water inlet and outlet
hoses are not squeezed or trapped
and that the machine does not stand on the
electrical cable while positioning.
WARNING: Use the new water inlet
hose supplied with your machine, do not
use an old machine’s hose.
WARNING: Run water through the
new hose before connecting.
Adjust the feet so the machine is level and
balanced. The machine should be placed
on flat ground otherwise it will be unstable
and the door of the machine will not close
properly.
WARNING: Connect the hose
directly to the water inlet tap. The pressure
supplied by the tap should be a minimum
of 0.03 MPa and a maximum of 1 MPa. If
the pressure exceeds 1 MPa, a pressure
relief valve must be fitted between the
connection.
Please install the decorative panel
as indicated on the assembly sheet.
Otherwise, the door may not open properly
and steam leakage problem may occur.
WARNING: After the connections are
made, turn the tap on fully and check
for water leaks. Always turn off the water
inlet tap after a wash program has finished.
2.2 Water Connection
We recommend fitting a filter to your water
inlet supply in order to prevent damage to
your machine due to contamination (sand,
rust, etc.) from indoor plumbing. This will
also help prevent yellowing and deposit
formation after washing.
Note printing on the water inlet hose!
If models are marked with 25°, the water
temperature may be max. 25 °C (cold
water).
An Aquastop water spout is available
with some models. Do not damage it
or allow it to become kinked or twisted.
EN - 8
| General | Details |
|---|---|
| Name | GRAM DS 4010 Dishwasher |
| Make | GRAM |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.77 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Hotpoint HFC 3C26 WCUK Dishwasher
ASKO DBI565IXXLS Logic Series 24 Dishwasher
FISHER AND PAYKEL DD24SDFTX9 N Dishwasher
SAMSUNG DW80CG40 Series Dishwasher
BOSCH SHP78DM5N Pocket Handle Dishwasher
smeg LSPU8653X 24″ Fingerprint Resistant Dishwasher
Whirlpool W10903644A Dishwasher
MAYTAG W11680100B Dishwasher
Miele 852-01 Dishwasher
FISHER and PAYKEL DD60SCHX9 Dishwasher