HEINNER HG-150SS Free Standing Dishwasher
If one of program monitor lights is on and start/Pause light is on and off
Your machine’s door is open, shut the door.
If the programme won’t start
➢
➢
➢
➢
➢
➢
Check if the plug is connected.
Check your indoor fuses.
Be sure that the water inlet tap is turned on.
Be sure that you have closed the machine door.
Be sure that you switched off the machine by pressing the Power On / Off button.
Be sure that the water inlet filter and the machine filters are not clogged.
If the control lamps won’t go out after a wash operation
The Power On/Off button is released yet.
If detergent residues are left in the detergent compartment
Detergent has been added when the detergent compartment was wet.
If water is left inside the machine at the end of the programme
➢
➢
➢
The water drain hose is clogged or twisted.
The filters are clogged.
The programme is not finished yet.
If the machine stops during a wash operation
➢
➢
➢
Power failure.
Water inlet failure.
Program can be on standby mode.
If shaking and hitting noises are heard during a wash operation
➢
➢
Dishes placed incorrectly.
Spray arm hitting the dishes.
If there are partial food wastes left on the dishes
➢
➢
➢
➢
➢
➢
➢
➢
➢
Dishes placed incorrectly into the machine, sprayed water did not reach related places.
Basket overly loaded.
Dishes leaning against one another.
Very small amount of detergent added.
An unsuitable, rather weak wash programme selected.
Spray arm clogged with food wastes.
Filters clogged.
Filters incorrectly fitted.
Water drain pump clogged.
If there are whitish stains on the dishes
➢
➢
➢
➢
➢
A very small amount of detergent is being used.
Rinse aid dosage setting at a very low level.
No special salt is being used despite the high degree of water hardness.
Water softener system setting is at a very low level.
Salt compartment cap not closed well.
If the dishes won't dry up
➢
➢
➢
A programme without a dry operation selected.
Rinse aid dosage set too low
Dishes unloaded too fast.
If there are rust stains on the dishes
➢
➢
➢
➢
➢
Stainless-steel quality of the dishes washed is insufficient.
High rate of salt in the wash water.
Salt compartment cap not closed well.
Too much salt spilt into the sides and into the machine while filling it with salt.
Unhealthy mains grounding.
Call an authorised service if the problem still persists after the controls or in case of any
malfunction not described above.
25
| General | Details |
|---|---|
| Name | HEINNER HG-150SS Free Standing Dishwasher |
| Make | HEINNER |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.99 MB |
(1 votes, average: 5.00 out of 5)
Loading...
HEINNER HDW-BI6006IE++ Free Standing Dishwasher
HEINNER HWDM-V9614D Front Load Dishwasher
HEINNER HDW-BIM60514E Dishwasher
HEINNER HDW-FSM60714AWD Series Dishwasher
Heinner HDW-FS6062WE Dishwasher
HEINNER HDW-BI4505IE++ Dishwasher
BOSCH SMV4ECX10E-38 Dishwasher
Hotpoint H8I HP42 Fully Integrated Dishwasher
CAFE CDD220P4WW2 Smart Drawer Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
BOSCH SMS6ZCI00G-36 Dishwasher
MONOGRAM ZDT985SINII Dishwasher
BOSCH SMS6TCW01G Dishwasher
BOSCH SMV4EB804E Fully Integrated Dishwasher
Monsher MD 6003 Dishwasher
FISHER and PAYKEL DW24UT2I2 Sanitize Integrated Dishwasher