HOOVER HV-D13SS 13 Place Dishwasher
Installation (Cont.)
Levelling the appliance
•
•
Position the dishwasher on a level and sturdy
floor.
Fig. 1
If the floor is uneven, adjust the adjustable feet
until it reaches a horizontal position; just screw
the feet in or out a little (Fig. 1).
•
•
The appliance should not be inclined more than
2°.
Correctly levelled, the appliance will be more
stable and much less likely to move or cause
vibrations and noise during operation.
Fig. 2
Freestanding installation
Between existing cabinets
•
The height of the dishwasher, 850 mm, has
been designed in order to allow the machine to
be fitted between existing cabinets of the same
height in modern fitted kitchens (Fig. 2).
•
The feet can be adjusted so that the correct
height is reached.
Underneath an existing worktop
Fig. 3
• If you wish to fit the machine under
an existing countertop, there must be
sufficient space to do so (see
Fig. 3, 1). The installation space must
match these outlined dimensions.
• WARNING: The existing countertop
must be stable, in order to prevent
imbalance.
• If the space under the countertop is
suitable for installing your machine,
remove dishwasher’s built-in worktop/
top panel first.
• To do so, first remove the screws
holding it in place, located at the rear
of the machine. Then, push the panel
1 cm from the front towards the rear
and lift it (Fig. 3, 2).
• Adjust the machine feet to account for
the slope of the floor (Fig. 3, 3).
• Push the machine under the counter, taking care not to crush or bend the hoses (Fig 3, 4).
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 |
10
tempo.org/support
| General | Details |
|---|---|
| Name | HOOVER HV-D13SS 13 Place Dishwasher |
| Make | Hoover |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.42 MB |

HOOVER HI 3E9E0S Dishwasher

Hoover 32901787 Dishwasher

HOOVER HI 4E7L0S-80 Semi Integrated Dishwasher





















































