Home > Hoover > HOOVER HV-D13SS 13 Place Dishwasher

HOOVER HV-D13SS 13 Place Dishwasher

Instructions (Cont.)  
Filling the rinse aid and adjusting the settings  
To fill the rinse aid compartment, open the rinse-aid compartment cap (Fig. 10).  
Fill the compartment with rinse aid to the MAX level (Fig. 11) and then close the  
cap.  
Be careful not to overfill the rinse aid compartment and wipe up any spills.  
CAUTION!  
Clean up any rinse aid spilled while filling with an absorbent cloth or paper towel to  
avoid excessive foaming during the next wash.  
Do not forget to replace the cap before you close the dishwasher door.  
Fig. 10  
Fig. 11  
When to refill the rinse aid dispenser  
Fill the rinse aid dispenser when the warning light [  
on.  
] on the control panel comes  
Adjusting the rinse aid dose  
In order to change the rinse aid level, follow the below steps before turning on the  
machine:  
Open the door of the machine.  
Turn on the machine, and press the PROGRAM button as soon as the machine is  
turned on.  
Hold down the PROGRAM button until “rA” disappears.  
The factory setting is 4 (see the table below) - the machine will display the last set  
dose level. Change the level by pressing the PROGRAM button repeatedly.  
Turn off the machine to save the setting.  
If the dishes are not drying properly or are spotted, increase the level. If blue  
stains form on your dishes, decrease the level.  
After Sales Support  
(AU) 1300 886 649 (NZ) 0800 836 761 |  
18  
tempo.org/support  
GeneralDetails
NameHOOVER HV-D13SS 13 Place Dishwasher
MakeHoover
LanguageEnglish
FiletypePDF (Download)
File size1.42 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
HOOVER HI 3E9E0S Dishwasher
HOOVER HI 3E9E0S Dishwasher
Hoover 32901787 Dishwasher
Hoover 32901787 Dishwasher
HOOVER HI 4E7L0S-80 Semi Integrated Dishwasher
HOOVER HI 4E7L0S-80 Semi Integrated Dishwasher

HOOVER HV-D13SS 13 Place Dishwasher