Hotpoint H7F HS41 UK Full Size Dishwasher
EN
PROBLEMS POSSIBLE CAUSES
SOLUTIONS
The dishwasher does
not fill the water.
The display shows:
No water in the water supply or the tap is closed. Make sure there is water in the water supply and the water tap is open.
The water inlet hose is kinked.
Check the inlet hose (see INSTALLATION). Close the door and press START/Pause button.
H O and is lit;
2
acoustic alarm
sounds.
The screen in the water inlet hose is clogged; it is
necessary to clean it.
Check and clean the screen in the water inlet hose. Close the door and press START/Pause button.
The dishwasher
finishes the cycle
prematurely.
The display shows:
F8 E3
The filter is clogged with food residues or lime-
scale
Clean the filter and descale the appliance (see CLEANING THE FILTER ASSEMBLY and DESCALE
INSTRUCTION).
Check if the end of the drain hose is placed at the correct height (see INSTALLATION). Check for
siphoning into the home sewage system, and install a siphon breaker/air admittance valve if
necessary.
Drain hose positioned too low or siphoning into
the home sewage system.
The detergent has not been measured out correctly or it is not suitable for use in dishwashers
(see FILLING THE DETERGENT DISPENSER).
An excessive amount of foam is present.
Air in the water supply.
Check water supply for leaks or other issues letting air inside.
The dishes are not
dried well.
Make sure the rinse aid dispenser is filled (see FILLING THE RINSE AID DISPENSER). Multifunctional
tablets only will not provide as good drying effects as the actual use of liquid rinse aid.
Rinse aid is not present or the dosage is too low.
The dishes have been unloaded after the door
Make sure the cycle has ended before starting to unload the dishes (see DAILY USE). For even
was opened automatically but before the actual better drying results, it is recommended to let the dishes sit inside the dishwasher with the door
cycle end.
open for additional 15 minutes after the cycle ends.
If you notice puddles of water inside cavities of cups, mugs or bowls, try loading the dishes
(especially in the upper rack) providing more inclination to let larger amounts of water drip
down before drying starts.
The dishes are sitting too flat.
Please check in the PROGRAMS TABLE if the selected program is equipped in the drying phase. A
cycle without the drying phase may not deliver desired drying efficiency, so it is recommended
to change cycle selection for the one that has the drying phase.
The selected cycle does not have the drying
phase.
The dishes are made of non-stick or plastic.
Some water drops remaining on this type of material are normal.
Dishes and glasses
have blue streaks or Rinse aid dosage is excessive.
bluish tinges.
Adjust the dosage to a lower setting.
Refill the reservoir with salt as soon as possible. Using the appliance without salt may cause
damage to its internal components.
The salt reservoir is empty.
Dishes and glasses
The water hardness setting is too low.
are covered with li-
Increase the setting (see WATER HARDNESS TABLE).
mescale or a whitish
film.
The cap of the salt reservoir is not properly closed. Check and close the salt reservoir cap.
Refill the dispenser with rinse aid and check the dosage setting (for more information - see FILLING
THE RINSE AID DISPENSER).
The rinse aid reservoir is empty or the rinse aid
dosage is insufficient.
The dishwasher
shows F8 E5
Valve is blocked or faulty.
Close the water tap, if possible. Do not switch off the power supply. Call the service.
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
•
•
•
Using QR code and visiting our website: docs.hotpoint.eu
Visiting our website: parts-selfservice.whirlpool.com
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting
our After-sales Service, please state the codes provided on your product’s identification plate.
The model information can be retrieved using the QR-Code reported in the energy label. The label also includes
IEC 436
:
6
| General | Details |
|---|---|
| Name | Hotpoint H7F HS41 UK Full Size Dishwasher |
| Make | Hotpoint |
| Language | English |
| Filetype | PDF (Download) |
| File size | 6.14 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Hotpoint H7I HP42 L UK Dishwasher
Hotpoint H7F HP33 UK Dishwasher
Hotpoint H8I HT59 LS UK Dishwasher
Hotpoint H7F HS51 Dishwasher
Hotpoint H7FHS41 Dishwasher
Hotpoint HA3FC10BS7A0S Dishwasher
Hotpoint H7F HS41 X Dishwasher
Hotpoint 869991662940 Dishwasher
Hotpoint H7I HT59 L Dishwasher
Hotpoint HFC 3C26 WCUK Dishwasher
IKEA 504.754.25 HYGIENISK Dishwasher
FISHER PAYKEL DD60SCTW9 Dishwasher
BOSCH SMS46KW02E Dishwasher
Hotpoint HA3FC10BS7A0S Dishwasher
GE Profile PDT795SYV UltraFresh System Dishwasher
Whirlpool 400011716396 Dishwasher
beko BDUN Dishwasher
AEG FFB73727PM Dishwasher
Miele PFD 407 Built Under Fresh Water Dishwasher
BOSCH SBV6ECX00E/38 Fully Integrated Dishwasher