Hotpoint H7F HS41 X Dishwasher
EN
CAPACITY: 15 standard place-settings
Foldable flaps with adjustable position
The side foldable flaps can be folded or unfold-
ed to optimize the arrangement of crockery in-
side the rack. Wine glasses can be placed safely
in the foldable flaps by inserting the stem of
each glass into the corresponding slots.
Depending on the model:
LOADING THE RACKS
CUTLERY RACK
The third rack was designed to house the cutlery.
Arrange the cutlery as shown in the figure.
A separate arrangement of the cutlery makes
collection easier after washing and improves
washing and drying performance.
Knives and other utensils with sharp edges
must be positioned with the blades facing
downwards.
• to unfold the flap there is needed to slide it up
and rotate or release it from the snaps and pull
it down.
• to fold the flap there is needed to rotate it and
slide flap down or pull it up and attach flap to
the snaps.
The cutlery rack is equipped with two sliding
side trays to make the most of the height of the
space below and enable the loading of high
items into the upper rack.
LOWER RACK
For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should
ideally be placed at the sides to avoid interferences with the spray arm.
The lower rack has tip-up supports which can be used in a vertical position
when arranging plates or in a horizontal position (lower) to load pans and
salad bowls easily.
UPPER RACK
Load delicate and light dishes: glasses, cups,
saucers, low salad bowls.
The upper rack has tip-up supports which can
be used in a vertical position when arranging
tea/ dessert saucers or in a lower position to
load bowls and food containers.
(loading example for the upper rack)
(loading example for the lower rack)
Adjusting the height of the upper rack
3D ZONE WASH
The height of the upper rack can be adjusted: a high position to place bulky 3D Zone Wash uses additional water jets located
crockery in the lower basket and a low position to make the most of the tip- both: in the lower and upper part of the dishwash-
up supports by creating more space upwards and avoiding collision with er to wash more intensively heavily soiled items by
the items loaded into the lower rack.
increasing water coverage on dishes.
The upper rack is equipped with an Upper Rack
height adjuster (see figure), without pressing the le-
vers, lift it up by simply holding the rack sides, as soon
as the rack is stable in its upper position. To restore to
the lower position, press the levers A at the sides of the
rack and move the basket downwards.
Example: Load pots and casseroles facing the lower
part of 3D Zone Wash components and activate the
3D Zone Wash option on the panel.
We strongly recommend that you do not adjust the
height of the rack when it is loaded.
NEVER raise or lower the basket on one side only.
CARE AND MAINTENANCE
CLEANING THE FILTER ASSEMBLY
Regularly clean the filter assembly so that the filters do not clog and that
the waste water flows away correctly.
Using the dishwasher with clogged filters or foreign objects inside the fil-
tration system or spray arms may cause unit malfunction resulting in loss of
performance, noisy work or higher resources usage.
The filter assembly consists of three filters which remove food residues
from the washing water and then recirculate the water.
B
The dishwasher must not be used without filters or if the filter is loose.
A
At least once per month or after every 30 cycles, check the filter assembly
and if necessary clean it thoroughly under running water, using a non-me-
tallic brush and following the instructions below:
A
1
2
1. Turn the cylindrical filter A in an anti-clockwise direction and pull it out
(Fig 1). It is important when reinstalling the filter that the two trian-
gles shown on the zoom meet.
2. Remove the cup filter B by exerting a slight pressure on the side flaps
(Fig 2).
3. Slide out the stainless-steel plate filter C (Fig 3).
4. In case you find foreign objects (such as broken glass, porcelain, bones,
fruit seeds etc.) please remove them carefully.
C
5. Inspect the trap and remove any food residues. NEVER REMOVE the
wash-cycle pump protection (shown by an arrow) (Fig 4).
4
3
After cleaning the filters, replace the filter assembly and fix it in position cor-
rectly; this is essential for maintaining the efficient operation of the dishwasher.
4
| General | Details |
|---|---|
| Name | Hotpoint H7F HS41 X Dishwasher |
| Make | Hotpoint |
| Language | English |
| Filetype | PDF (Download) |
| File size | 53.9 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Hotpoint H7I HP42 L UK Dishwasher
Hotpoint H7F HP33 UK Dishwasher
Hotpoint H7F HS41 UK Full Size Dishwasher
Hotpoint H8I HT59 LS UK Dishwasher
Hotpoint H7F HS51 Dishwasher
Hotpoint H7FHS41 Dishwasher
Hotpoint HA3FC10BS7A0S Dishwasher
Hotpoint 869991662940 Dishwasher
Hotpoint H7I HT59 L Dishwasher
Hotpoint HFC 3C26 WCUK Dishwasher
SIEMENS SR93EX24MG Fully Integrated Dishwasher
SIEMENS 9001902343 Dishwasher
FRIGIDAIRE FDPC4221AS Dishwasher
omega ODWIS6015X Dishwasher
Omega ODWIF6015 Dishwasher
Electrolux ESM48311SX Free Standing Dishwasher
JENNAIR W11680101A Dishwasher
FISHER and PAYKEL DW60UT4HI2 Tall Dishwasher
IKEA 304.754.26 LAGAN Dishwasher
Midea MDC17P2BWW Dishwasher