Hotpoint H7F HS41 X Dishwasher
Daily Reference Guide
EN
PROGRAMS TABLE
Duration
of wash
Water
Energy
Available
options *)
Programs description
consumption consumption
program
(litres/cycle) (kWh/cycle)
(h: min)**)
Eco 50°- Program is suitable to clean normally soiled tableware,
that for this use, it is the most efficient program in terms of its com-
bined energy and water consumption, and that it is used to assess
compliance with the EU Ecodesign legislation.
3:30
9.5
0.76
Auto Intensive 65° - Automatic program for
Senses the level of
2:25 - 3:10
1:20 - 3:00
15.5 - 24.5
7.5 - 19.5
1.30 - 1.70
0.75 - 1.20
heavily soiled dishes and pans.
soiling on the dish-
Auto Mixed 55° - Automatic program for es and adjusts the
normally soiled dishes with dried food program according-
residues.
ly. When the sensor
is detecting the soil
level an animation
appears in the display
and the cycle dura-
tion is updated.
Auto Fast 50°
-
Automatic program
for normally and lightly soiled dishes.
The everyday cycle that ensure optimal
cleaning and drying performance in
shorter time.
1:00 - 1:50
0:30 - 0:40
7.5 - 15.5
0.70 - 1.10
0.55 - 0.65
Rapid 45° - Program is recommended for limited amount of light-
ly-soiled dishes with no dried food residues. Does not include the
drying phase.
10.0 - 12.0
-
Delicates 45° - Program for delicate items, which are more sensitive
1:40 - 1:50
0:12
12.5 - 16.5
4.5
0.95 - 1.20
0.10
to high temperatures, for example, glasses and cups.
Soak - Use to refresh crockery planned to be washed later. No
detergent is to be used with this program.
-
-
Self-Clean 65° - Program to be used to perform maintenance of the
dishwasher, to be carried out only when the dishwasher is EMPTY
using specific detergents designed for dishwasher maintenance.
1:15
11.0
1.10
-
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration by up to 20 min.
OPTIONS AND FUNCTIONS
OPTIONS can be selected/ deselected, after choosing the program, directly by pressing the corresponding button (if available - the indicator lights up)
(see CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and
beeps will sound. The option will not be enabled. An option can change time or water or energy consumption for the program.
3D ZONEWASH - Thanks to the additional power jets this option provides
up to 80% more water power, a more intensive and powerful wash in the
lower rack, in the specific bottom area.This option is recommended for washing
pots and casseroles (Please refer to the 3D loading section).
DELAY - The start of the program may be delayed for a period of time
between 0:30 and 24 hours.
1. Select the program and any desired options. Press the DELAY button
(repeatedly) to delay the start of the program. Adjustable from 0:30 to 24
hours. Once the 24 hours setting is reached, press the DELAY another time
to deactivate the DELAY function.
HALF LOAD - If there are not many dishes to be washed, HALF LOAD is
used to save water, electricity or time, depending on the selected program.
Remember to reduce the amount of detergent.
2. Close the door and press the START/Pause button. The timer will begin
counting down.
3. Once this time has elapsed, the indicator light switches off and the program
begins automatically.
The DELAY function cannot be set once a program has been started.
EXTRA DRY - The higher temperature during the final rinse and the
extended drying phase allows for improved drying. The EXTRA DRY
option results in the lengthening of the wash cycle.
DESCALE - Alarm - Limescale accumulation was detected on internal
components of the appliance. Check if the Water Hardness Setting is
at the correct value and salt is present in the salt container (see FIRST TIME
USE), then use a descaling product (WPro brand is recommended) with Self-
Clean program. After a successful descaling, the icon will stop being displayed.
If the actions above are not performed, product performance will deteriorate.
DESCALE warning will start blinking and «dES» alarm will appear on the dis-
play. If still no action is taken, the appliance will only allow a certain number
of cycles to be started (indicated during «dES» alarm display) and then will
be BLOCKED to prevent component damage, with only the Self-Clean
program available. Performing a full descaling will unblock the product.
In the case of extremely high amounts of limescale, descaling may have to
be performed twice to be efficient.
SILENT - Suitable for night-time operation of the appliance. This option
can be used to limit noise emissions during wash phases. It will increase
cycle time depending on base cycle selection.
SANI RINSE - This option can be used to sanitize washed dishes. It will
increase the final rinse temperature and add an antibacterial wash to the
selected program. Ideal to clean crockery and feeding bottles.The dishwash-
er door must be kept shut for the entire duration of the program in order to
guarantee a reduction of germs. WARNING: the crockery and plates could
be extremely hot at the end of the cycle.
SENSING - When the sensor is detecting the soil level an anima-
tion appears in the display (around 20 min.) and the cycle duration
is updated. SENSING is for the level of soiling on the dishes and
is present for all cycles (excepting Eco) adjusting the program accordingly.
ACTIVEDRY - It is a convection drying system which automatically opens
the door during/after the drying phase to ensure exceptional drying per-
formance every day. The door opens at a temperature that is safe to your
kitchen furniture, thus door will not be opened when the option of SANI
RINSE is on.
As additional steam protection, specially designed protection foil is added
together with the dishwasher.
KEYLOCK - A long press (for 3 seconds) of SILENT button, will activate
the KEYLOCK function. The KEYLOCK function will block the control panel
except for the ON/OFF button. To deactivate the KEYLOCK, long press again.
WATER TAP CLOSED - Alarm - Flashes, when there is no inlet water or
water tap is closed.
To see how to mount protection foil please refer to the INSTALLATION GUIDE.
This feature is active by default, but it is possible to deactivate it in the“SET-
TINGS MENU”.
3
| General | Details |
|---|---|
| Name | Hotpoint H7F HS41 X Dishwasher |
| Make | Hotpoint |
| Language | English |
| Filetype | PDF (Download) |
| File size | 53.9 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Hotpoint H7I HP42 L UK Dishwasher
Hotpoint H7F HP33 UK Dishwasher
Hotpoint H7F HS41 UK Full Size Dishwasher
Hotpoint H8I HT59 LS UK Dishwasher
Hotpoint H7F HS51 Dishwasher
Hotpoint H7FHS41 Dishwasher
Hotpoint HA3FC10BS7A0S Dishwasher
Hotpoint 869991662940 Dishwasher
Hotpoint H7I HT59 L Dishwasher
Hotpoint HFC 3C26 WCUK Dishwasher
SIEMENS SN53ES02AE Dishwasher
Miele G 15740-45 SCi SL Brilliant Dishwasher
CAFE CDD220P4WW2 Smart Drawer Dishwasher
FISHER PAYKEL DD24DI9N Dishwasher
FISHER AND PAYKEL DD60STX6HI1 Integrated Single DishDrawer Dishwasher
FISHER and PAYKEL DD60DDFHX9 Dishwasher
GAGGENAU 400 Dishwasher
rhima VU-35 Benchtop Glass or Dishwasher
Amana ADB1400AGW Dishwasher
IKEA ÖSTVEDA Integrated Dishwasher