Home > Hotpoint > Hotpoint H7F HS41 X Dishwasher

Hotpoint H7F HS41 X Dishwasher

Daily Reference Guide  
EN  
CLEANING THE SPRAY ARMS  
The lower spray arm may be removed  
by pulling it upwards and rotating it  
anti-clockwise. Mounting back the  
spray arm is by pulling it down and  
rotating it clockwise.  
On occasions, food residue may  
become encrusted onto the  
spray arms and block the holes  
used to spray the water. It is  
therefore recommended that  
you check the arms from time  
to time and clean them with a  
small non-metallic brush.  
The top spray arm may be removed  
by pressing it up and then rotating  
it anti-clockwise. Mounting back the  
spray arm is by pulling it upwards and  
rotating it clockwise.  
To remove the upper spray you  
must remove it together with  
the manifold.  
TROUBLESHOOTING  
In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list.  
For other errors or issues please contact authorized After-sales Service whose contact details can be found in the warranty booklet.  
Spare parts will be available for a period of either up to 7 or up to 10 years, according to the specific Regulation requirements.  
PROBLEMS POSSIBLE CAUSES  
SOLUTIONS  
The salt  
Refill the reservoir with salt (for more information - see FILLING THE SALT RESERVOIR). Check the  
Salt reservoir is almost empty.  
indicator is lit  
water hardness setting if necessary - see WATER HARDNESS TABLE.  
The salt indicator  
Salt reservoir is empty.  
is blinking  
Refill the reservoir with salt as soon as possible. Using the appliance without salt may cause  
damage to its internal components.  
The rinse aid  
indicator is lit or  
blinking  
Rinse aid dispenser is empty. (After refill the rinse  
aid indicator may remain lit for a short time).  
Refill the dispenser with a rinse aid (for more information - see FILLING THE RINSE AID DISPENSER).  
Descale  
Descale the appliance immediately using the Self Clean program and a commercially available  
descaling product (see OPTIONS AND FUNCTIONS). Refill the reservoir with salt. Check the water  
hardness setting. If the appliance is not descaled, it will stop functioning.  
indicator is lit  
Limescale is accumulating on internal components  
of the appliance.  
or blinking; "dES"  
alarm is displayed.  
The appliance has not been plugged in properly. Insert the plug into the socket.  
For safety reasons, the dishwasher will not restart automatically when power returns.  
Close the door and press START/Pause button.  
Power outage.  
The dishwasher door is not closed.  
The dishwasher  
Vigorously push the door until you hear the “click.  
won’t start or does ActiveDry pin is not pulled in.  
not respond to  
A cycle is interrupted by the door opening for  
commands.  
Close the door within 4 sec. and press START/Pause button.  
more than 4 seconds.  
Switch off the appliance by pressing the ON/OFF/Reset button, switch it back on after approxi-  
mately one minute and restart the program. If the problem persists, unplug the appliance for 1  
minute, then plug it back in.  
The control panel does not respond or F6 E1 is  
displayed.  
The filter is clogged with food residues or  
limescale.  
Clean the filter and descale the appliance (see CLEANING THE FILTER ASSEMBLY and DESCALE  
The dishwasher  
won’t drain.  
Display shows:  
F7 E3 or F9 E1  
INSTRUCTION).  
The drain hose is kinked.  
Check the drain hose (see INSTALLATION INSTRUCTIONS).  
Clean the sink drain pipe.  
The sink drain pipe is blocked.  
Dishes are rattling against each other.  
Position the crockery correctly (see LOADING THE RACKS).  
The detergent has not been measured out correctly or it is not suitable for use in dishwashers  
(see FILLING THE DETERGENT DISPENSER). Restart the current cycle by switching OFF the dish-  
washer, then switch it on again, select a new program, close the door and press START/Pause  
button. Please do not add any detergent.  
The dishwasher  
makes excessive  
noise.  
An excessive amount of foam is present.  
Crockery has not been arranged properly.  
Arrange the crockery correctly (see LOADING THE RACKS).  
The filter is clogged with food residues or limescale. Clean the filter assembly (see CARE AND MAINTENANCE).  
Crockery has not been arranged properly. Arrange the crockery correctly (see LOADING THE RACKS).  
Spray arms cannot rotate freely, being hindered Arrange the crockery correctly (see LOADING THE RACKS). Check that the upper rack is in the  
by the dishes.  
correct position and adjust (lift up) if necessary.  
The wash cycle is too gentle.  
Select an appropriate wash cycle (see PROGRAMS TABLE).  
The dishes are not  
clean.  
The detergent has not been measured out correctly or it is not suitable for use in dishwashers (see  
FILLING THE DETERGENT DISPENSER).  
An excessive amount of foam is present.  
The cap on the rinse aid compartment has not  
been closed correctly.  
Make sure the cap of the rinse aid dispenser is closed.  
The filter is clogged with food residues or limescale. Clean the filter and descale the appliance (see CLEANING THE FILTER ASSEMBLY).  
The salt reservoir is empty. Fill the salt reservoir (see FILLING THE SALT RESERVOIR).  
No water in the water supply or the tap is closed. Make sure there is water in the water supply and the water tap is open.  
The dishwasher  
does not fill the  
water.  
The water inlet hose is kinked.  
Check the inlet hose (see INSTALLATION). Close the door and press START/Pause button.  
The display shows:  
H O and is  
The screen in the water inlet hose is clogged; it is  
necessary to clean it.  
2
Check and clean the screen in the water inlet hose. Close the door and press START/Pause button.  
lit; acoustic alarm  
sounds.  
5
GeneralDetails
NameHotpoint H7F HS41 X Dishwasher
MakeHotpoint
LanguageEnglish
FiletypePDF (Download)
File size53.9 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Hotpoint H7I HP42 L UK Dishwasher
Hotpoint H7I HP42 L UK Dishwasher
Hotpoint H7F HP33 UK Dishwasher
Hotpoint H7F HP33 UK Dishwasher
Hotpoint H7F HS41 UK Full Size Dishwasher
Hotpoint H7F HS41 UK Full Size Dishwasher
Hotpoint H8I HT59 LS UK Dishwasher
Hotpoint H8I HT59 LS UK Dishwasher
Hotpoint H7F HS51 Dishwasher
Hotpoint H7F HS51 Dishwasher
Hotpoint H7FHS41 Dishwasher
Hotpoint H7FHS41 Dishwasher
Hotpoint HA3FC10BS7A0S Dishwasher
Hotpoint HA3FC10BS7A0S Dishwasher
Hotpoint 869991662940 Dishwasher
Hotpoint 869991662940 Dishwasher
Hotpoint H7I HT59 L Dishwasher
Hotpoint H7I HT59 L Dishwasher
Hotpoint HFC 3C26 WCUK Dishwasher
Hotpoint HFC 3C26 WCUK Dishwasher

Hotpoint H7F HS41 X Dishwasher