Home > Hotpoint > Hotpoint HSFC 3T127 C Dishwasher

Hotpoint HSFC 3T127 C Dishwasher

EN  
LOADING THE RACKS  
UPPER RACK  
LOWER RACK  
Load delicate and light dishes: glasses, cups,  
saucers, low salad bowls.  
For pots, lids, plates, salad bowls, cutlery  
etc. Large plates and lids should ideally be  
placed at the sides to avoid interferences  
with the spray arm.  
(loading example for the upper rack)  
(loading example for the lower rack)  
The lower rack has a Space Zone A, a special pull-out support in the  
rear of the rack that can be used to support frying pans or baking pans  
in upright position, thus taking up less space.  
ADJUSTING THE HEIGHT OF THE UPPER RACK  
The height of the upper basket can be adjusted: high position to place  
bulky crockery in the lower basket and low position to make the most  
of the tip-up compartments by creating more space upwards.  
The upper rack is equipped with a Upper Rack  
height adjuster (see figure), without pressing the  
levers, lift it up by simply holding the rack sides,  
as soon as the rack is stable in its upper position.  
To restore to the lower position, press the levers  
(A) at the sides of the rack and move the basket  
downwards.  
In order to use it, just get hold of the coloured grip and pull it upwards  
B while rotating it forward. The supports can slide right and left to fit  
the size of the crockery.  
A
B
We strongly recommend that you do not  
adjust the height of the rack when it is loaded.  
NEVER raise or lower the basket on one side  
only.  
FOLDABLE FLAPS WITH ADJUSTABLE POSITION  
The side foldable flaps can be fold or unfold to  
optimize the arrangement of crockery inside  
the rack.  
The lower rack has tip-up supports which can be used in a vertical  
position when arranging plates or in a horizontal position (lower) to  
load pans and salad bowls easily.  
Wine glasses can be placed safely in the  
foldable flaps by inserting the stem of each  
glass into the corresponding slots.  
CUTLERY BASKET  
It is fitted with top grids for improved cutlery arrangement. It must only  
be positioned at the front of the lower rack.  
Depending on the model:  
• to unfold the flaps there is needed to slide  
it up and rotate or release it from the snaps  
and pull it down.  
• to fold the flaps there is needed to rotate it  
and slide flaps down or pull it up and attach  
flaps to the snaps.  
SLIDING TRAY  
The upper rack is fitted with a sliding tray  
which can be used to hold small crockery and  
cutlery. For optimum washing performance,  
avoid positioning bulky crockery directly  
below the tray. The tray is removable.  
Knives and other utensils with sharp edges must be placed in the  
cutlery basket with the points facing downwards or they must be  
positioned horizontally in the tip-up compartments on the upper  
rack.  
5
GeneralDetails
NameHotpoint HSFC 3T127 C Dishwasher
MakeHotpoint
LanguageEnglish
FiletypePDF (Download)
File size18.07 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Hotpoint H7F HS41 UK Full Size Dishwasher
Hotpoint H7F HS41 UK Full Size Dishwasher
Hotpoint H8I HT59 LS UK Dishwasher
Hotpoint H8I HT59 LS UK Dishwasher
Hotpoint H7I HP42 L UK Dishwasher
Hotpoint H7I HP42 L UK Dishwasher
Hotpoint H7F HP33 UK Dishwasher
Hotpoint H7F HP33 UK Dishwasher
Hotpoint H7F HS51 Dishwasher
Hotpoint H7F HS51 Dishwasher
Hotpoint H7FHS41 Dishwasher
Hotpoint H7FHS41 Dishwasher
Hotpoint HA3FC10BS7A0S Dishwasher
Hotpoint HA3FC10BS7A0S Dishwasher
Hotpoint H7F HS41 X Dishwasher
Hotpoint H7F HS41 X Dishwasher
Hotpoint 869991662940 Dishwasher
Hotpoint 869991662940 Dishwasher
Hotpoint H7I HT59 L Dishwasher
Hotpoint H7I HT59 L Dishwasher

Hotpoint HSFC 3T127 C Dishwasher