Home > Ikea > IKEA RÅGLANDA Dishwasher

IKEA RÅGLANDA Dishwasher

ENGLISH  
6
away from the installation site. After  
unpacking the appliance, make sure that it  
has not been damaged during transport.  
In the event of problems, contact the  
dealer or your nearest After-sales Service.  
Once installed, packaging waste (plastic,  
ELECTRICAL WARNINGS  
The rating plate is on the edge of the  
dishwasher door (visible when the door is  
open).  
It must be possible to disconnect  
the appliance from the power supply by  
styrofoam parts etc.) must be stored out of unplugging it if plug is accessible, or by  
reach of children - risk of suffocation.  
The appliance must be disconnected from  
the power supply before any installation  
operation - risk of electrical shock. During  
installation, make sure the appliance does  
not damage the power cable - risk of fire or  
a multi-pole switch installed upstream of  
the socket in accordance with the wiring  
rules and the appliance must be earthed in  
conformity with national electrical safety  
standards.  
Do not use extension leads, multiple  
electrical shock. Only activate the appliance sockets or adapters. The electrical  
when the installation has been completed.  
Connect the dishwasher to the water  
mains using only new hose sets. The old  
hose sets should not be reused. All hoses  
must be securely clamped to prevent them  
coming loose during operation.  
components must not be accessible to  
the user after installation. Do not use the  
appliance when you are wet or barefoot.  
Do not operate this appliance if it has  
a damaged power cable or plug, if it is  
not working properly, or if it has been  
damaged or dropped.  
All local waterboard regulations must be  
complied with.  
If the supply cord is damaged, it must  
be replaced with an identical one by the  
manufacturer, its service agent or similarly  
qualified persons in order to avoid a  
hazard - risk of electrical shock.  
Water supply pressure 0.05 - 1.0 MPa.  
The appliance must be placed against  
the wall or built into furniture to limit the  
access to its rearside.  
For dishwashers having ventilation  
openings in the base, the openings must 6  
not be obstructed by a carpet.  
If the fitted plug is not suitable for your  
socket outlet, contact a qualified technician.  
Do not pull the power supply cable. Do not  
immerse the mains cord or plug in water.  
Keep the cord away from hot surfaces.  
If installing the dishwasher at the end  
of a row of units making the side panel  
accessible, the hinge area must be covered  
to avoid risk of injury.  
ELECTRICAL CONNECTION FOR GREAT  
BRITAIN AND IRELAND ONLY  
The inlet water temperature depends on  
the dishwasher model. If the installed inlet  
hose is marked “25°C Max”, the maximum  
allowed water temperature is 25°C. For all  
other models the maximum allowed water  
temperature is 60°C. Do not cut hoses  
and, in the case of appliances fitted with  
a waterstop system, do not immerse the  
plastic casing containing the inlet hose  
in water. If hoses are not long enough,  
contact your local dealer. Make sure the  
inlet and drain hoses are kink-free and are  
not crushed. Before using the applinace  
for the first time, check the water inlet  
and drain hose for leaks. Make sure that  
the four feet are stable and resting on  
the floor, adjusting them as required, and  
check that the dishwasher is perfectly  
levelled using a spirit level.  
Fuse replacement.  
If the mains lead of this appliance is fitted  
with a BS 1363A 13amp fused plug, to  
change a fuse in this type of plug use an  
A.S.T.A. approved fuse to BS1362 type and  
proceed as follows:  
1. Remove the fuse cover  
A
B
(A) and fuse (B).  
2.Fit replacement 13A  
fuse into fuse cover.  
3.Refit both into plug.  
Important:  
The fuse cover must be refitted when  
changing a fuse and if the fuse cover is lost  
the plug must not be used until a correct  
replacement is fitted.  
Correct replacement are identified by the  
colour insert or the colour embossed in  
words on the base of the plug.  
Use the appliance only when the covers  
shown on diagram 19 in the Assembly  
instruction are correctly assembled - risk  
of injury.  
Replacement fuse covers are available  
from your local electrical store.  
GeneralDetails
NameIKEA RÅGLANDA Dishwasher
MakeIkea
LanguageEnglish
FiletypePDF (Download)
File size59.62 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
IKEA 404.755.53 Medelstor Dishwasher
IKEA 404.755.53 Medelstor Dishwasher
IKEA 804.621.67 Lagan Dishwasher
IKEA 804.621.67 Lagan Dishwasher
IKEA RENGÖRA 204.756.05 Dishwasher
IKEA RENGÖRA 204.756.05 Dishwasher
IKEA 9001774317 TORSBODA Dishwasher
IKEA 9001774317 TORSBODA Dishwasher
IKEA 9001774318 Dishwasher
IKEA 9001774318 Dishwasher
IKEA SBE8596Z0E DISKAD PROFFSIG Dishwasher
IKEA SBE8596Z0E DISKAD PROFFSIG Dishwasher
IKEA VILLBODA Dishwasher
IKEA VILLBODA Dishwasher
IKEA 504.754.25 HYGIENISK Dishwasher
IKEA 504.754.25 HYGIENISK Dishwasher
IKEA AA-2412057-2-1 RÅGLANDA Dishwasher
IKEA AA-2412057-2-1 RÅGLANDA Dishwasher
IKEA 905.681.49 OSTVEDA Dishwasher
IKEA 905.681.49 OSTVEDA Dishwasher

IKEA RÅGLANDA Dishwasher