LG LDTS5552D Smart Dishwasher
INSTALLATION 19
NOTE
Connecting Water Supply
Line and Power
The best location for the electrical conduit is on the
right side of the back wall. Re-route the electrical
cable before installation if the electrical conduit pipe
is longer than 3” (76 mm) and is centered on the
back wall.
Connecting Water Supply Line
With the home water supply turned off, connect
the water supply line to the inlet valve on the left
front of the dishwasher.
1
Turn off electrical power to the unit at the circuit
breaker.
1
Use a Phillips screwdriver to remove the screw
from the junction box cover and remove the
cover.
2
CAUTION
Tape or compound should not be used on
dishwasher inlet valve.
Tighten the compression nut.
2
Use a Phillips screwdriver to remove 2 screws
.
3
Slide the water supply line back through the
channel, pulling gently from inside the cabinet
to make sure the line is not kinked, pinched,
stressed or crushed.
3
Connecting Power
The dishwasher should have a dedicated properly
grounded branch circuit to connect the 3 wire setup
which includes the ground wire.
If a 3-prong power supply is used, it should be in an
accessible location adjacent to the dishwasher within
4 ft. (1.22 m) of the dishwasher side and not behind
the dishwasher.
Remove the junction box from the appliance.
4
| General | Details |
|---|---|
| Name | LG LDTS5552D Smart Dishwasher |
| Make | LG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.56 MB |

LG LDTH7972SS Black Dishwasher

LG SDWB24S3 STUDIO Smart Dishwasher

LG LDTH7972D Smart Tub Dishwasher

LG LDPH7972D Smart Dishwasher

LG XD3A25UMB 15 Place QuadWash Dishwasher

LG LDT779 Dishwasher

LG LDT7808BD Dishwasher

LG LDFN4542S Dishwasher

LG DFB424 Dishwasher

LG LDTS5552D PrintProof Black Dishwasher





























