Midea MDW-14D8-OD Dishwasher
NOTE
The salt container must only be refilled when the salt warning light in the control panel
comes on. Depending on how well the salt dissolves, the salt warning light may still be on
even though the salt container is filled.
If there is no salt warning light in the control panel (for some models), you can estimate
when to fill the salt into the softener by the cycles that the dishwasher has run.
If salt has spilled, run a soak or quick program to remove it.
Water Softener
The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water, which would
have a detrimental or adverse effect on the operation of the appliance.
The more minerals there are, the harder your water is.
The softener should be adjusted according to the hardness of the water in your area.
Your local Water Authority can advise you on the hardness of the water in your area.
Adjusting salt consumption
The dishwasher is designed to allow for adjustment in the amount of salt consumed
based on the hardness of the water used. This is intended to optimise and customise
the level of salt consumption.
Please follow the steps below for adjustment in salt consumption.
1. Open the door, switch on the appliance;
2. Within 60 seconds after the appliance was switched on press the Program
button for more than 5 seconds to enter the water softener setting mode.
3. Press the Program button again to select the proper setting according to your
local water hardness, the setting will change in the following sequence:
H3->H4->H5->H6->H1->H2->H3;
4. Without operation in 5 seconds or press the Power button to complete the setup
and exit the setup mode.
WATER HARDNESS
Water
Regeneration occurs Salt
softner every X program
consumption
(gram/cycle)
German French British
dH
1)
Mmol/l
level
sequence
fH
Clarke
0 - 5
0 - 9
0 - 6
0 - 0.94
1.0 - 2.0
2.1 - 3.0
3.1 - 4.0
4.1 - 6.0
6.1 - 9.8
H1
H2
H3
H4
H5
H6
No regeneration
0
9
6 - 11
12 - 17
18 - 22
23 - 34
35 - 55
10 - 20
21 - 30
7 - 14
15 - 21
10
5
3
2
1
12
31 - 40 22 - 28
41 - 60 29 - 42
61 - 98 43 - 69
20
30
60
1 dH=1.25 Clarke=1.78 ) fH=0.178mmol/l
The factory setting: H3
1) Every cycle with a regeneration operation consumes additional 2.0 litres of water, the
energy consumption increases by 0.02 kWh and the program extents by 4 minutes.
27
| General | Details |
|---|---|
| Name | Midea MDW-14D8-OD Dishwasher |
| Make | Midea |
| Language | English |
| Filetype | PDF (Download) |
| File size | 12.76 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Midea MDWPF1233F W WG,MDWPF1233F W WG Dishwasher
Midea WQP12-5201C Dishwasher
Midea MDF18A1A Series Dishwasher
Midea MDF24P2B Dishwasher
Midea WQP4-2605 Tabletop Dishwasher
Midea MDT24X2APR Dishwasher
Midea MDC17P2BWW Dishwasher
Midea MDF24P1BST Dishwasher
Midea MDC17P0ABB Dishwasher
Midea MDC22P1AWW Dishwasher
AEG FSK53617Z Dishwasher
FISHER and PAYKEL DD60SDFTB9 Contemporary Tall Dishwasher
FISHER PAYKEL DW60UNT4B2 Built-Under Dishwasher
SIEMENS SN97T801BE Dishwasher
THPRIMO 45DFULLSLID Vaatwasser Dishwasher
GE APPLIANCES GDF650SYVFS Dishwasher
Haier HDW15V3S1 Satina Dishwasher
BOSCH SMI6ECS10E Dishwasher
Whirlpool WDF550SAA Undercounter Dishwasher
BOSCH SMS2ITW41G WiFi Connected Standard Dishwasher