Home > NELSON > NELSON AD60 Passthrough Dishwasher

NELSON AD60 Passthrough Dishwasher

5.2 Connection to the water supply  
Check that the intake water pressure, flow rate and temperature are as stated in the  
dishwasher's technical characteristics. If the dynamic pressure exceeds the limit  
stated in the technical characteristics, a pressure reducer must be installed. If the  
pressure is lower, it might be necessary to fit a special pump to ensure optimal  
performance. Connect the water intake hose to a connector with ¾” gas threaded  
fitting, inserting the filter "A" provided. The tap must be easily accessible after  
installation of the appliance.  
Only use new hoses for connection to the water supply. Old hoses or hoses salvaged from  
previous installations must not be used.  
If the water supply system has been unused for a long time or if work has been done on it,  
before connecting the appliance's intake hose run the water to flush the air and dirt from the  
pipes.  
FOR MODELS WITH A WATER SOFTENER  
An “approved” double check valve or some other no less effective device providing backflow  
prevention protection to at least fluid category two shall be fitted at the point of connection  
between the water supply and the fitting or appliance.  
FOR MODELS WITHOUT A WATER SOFTENER  
An “approved” single check valve or some other no less effective device providing backflow  
prevention protection to at least fluid category two shall be fitted at the point of connection  
between the water supply and the fitting or appliance.  
5.3 Drain connection  
The dishwasher is fitted with a drain pump and can operate with drain connections on the floor or wall.  
Before connecting the hose, check that the diameter and height of the wall drain connection are as stated  
in the dishwasher's technical characteristics. When connecting the dishwasher's drain hose, take care to  
avoid kinks, sharp bends or crushing. Since the drain water temperature can be very high, the end of the  
drain hose must be fixed to the drain connection using the hose clamps provided.  
The drain connection must be made in accordance with the relevant national regulations.  
Substandard connections may cause flowback and in some cases pollution.  
No extensions must be added to the drain hose supplied with the appliance. Any extensions  
might cause drainage problems.  
13  
GeneralDetails
NameNELSON AD60 Passthrough Dishwasher
MakeNELSON
LanguageEnglish
FiletypePDF (Download)
File size0.52 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
nelson AD40 Commercial Dishwasher
nelson AD40 Commercial Dishwasher

NELSON AD60 Passthrough Dishwasher