×
- 1. Product Identification (Application, General Functions And Intended Use → Safety Precautions And Instructions → Product Characteristics → Instructions For The User)
- 2. Important Information (Safety → Use And Maintenance)
- 3. Product Identification (Application, General Functions And Intended Use → Name And Address Of Manufacturer Or Distributor → Declaration Of Conformity To Product Standards)
- 4. Description Of The Appliance (Cover (top) → Display And Control Panel → Hood → Hood Opening / Closing Handle)
- 5. Symbols Used In The Manual
- 6. Safety Precautions And Instructions (Correct Installation)
- 7. Safe Use
- 8. Correct Maintenance
- 9. Product Characteristics (Overall Dimensions → Lower Back Panel → Filler Hose → Electricity Supply Cable)
- 10. Technical Characteristics (Electricity Supply → Intake Water Pressure → Intake Water Temperature → Noise Level)
- 11. Preparing The Appliance For Use (Positioning And Installation)
- 12.
- 13. Connection To The Water Supply (Drain Connection)
- 14. Connection To The Electricity Supply
- 15. First Start-up (Preparing For Use → Using The Water Softener)
- 16. Control Panel (On-off Button → Program Selection Button → Start Confirm/pause Button → Total Emptying Button (tank And Boiler))
- 17. Set-up (Dishwasher Parameter Modification Procedure → With The Tank Empty → With The Tank Full/the Hood Open → Quitting The Setup Menu Automatically)
- 18. Modifiable Parameters (Rinsing Temperature → Washing Temperature → Adjusting Rinse Aid Dispensing → Adjusting Detergent Dispensing)
- 19. Regeneration Frequency Setup (models With Softener) (Mains Water Hardness Setting Table → Extra Rinse → 'clean Water' Cycle)
- 20. Thermostop (High Speed (fst) Or Economy (eco) Filling (fill) → Cycles Performed Counter → User Program Duration Customisation (optional, Only If Installed))
- 21. Service Setting (for After-sales Service Only) (Accessing The Technical Set-up Menu. → Starting The Peristaltic Pumps Rapid Filling Of Detergent And Rinse Aid Delivery Circuit. → Perform After The Parameter Modification Procedure Explained In The Previous Point. → With The Dishwasher Powered Up And The Tank Full, Press The On/off Button For A Few Seconds; When ------ Appears On The Display, Release The Button And Press It Again Quickly Within 0.5 Seconds.)
- 22. Malfunctions Shown On The Display (for The Technician) (Tank Temperature Probe Malfunction → Tank Water Filling Malfunction → Water Pump-out Malfunction → Boiler Temperature Probe Malfunction)
- 23. Menu Service Wrong Setting (Check Cleanliness Of The Rinse Nozzles → Faulty Boiler Pressure Switch → Leakage Or Unbinding Of The Tube → Rinsing Pump Malfunction)
- 24. Instructions For The User (Control Panel → On-off Button → Program Selection Button → Start Confirm/pause Button)
- 25. Before Washing (Check)
- 26. First Use Each Day (tank And Boiler Empty) (Load The Dishes → Select The Program Required By Pressing)
- 27. Cycle In Progress (Unload The Dishes → End)
- 28. Operating Anomalies (Program Change → Filter Presence Sensor)
- 29. Choosing The Program (Program Type Of Dirt → Baskets Provided)
- 30. Glasses (Cutlery)
- 31. Maintenance And Cleaning (N.b. → Ipx4 Protection → Cleaning Filters → Limescale Deposits)
- 32. Cleaning The Filter During The Day (Total Pump-out At The End Of The Day)
- 33. Topping Up With Regenerating Salt (for Models With Softener) (Routine Inspection Of The Spray Arm (once A Week) → Lengthy Periods Out Of Use)
- 34. Troubleshooting (The Dishwasher Does Not Start → The Washing Program Does Not Start → Poor Washing Results)
- 35. Insufficient Rinse (Insufficient Drying → Stained Glasses And Cutlery → Water Left In The Tank After Pump-out)
- 36. Malfunctions Shown On The Display (for The User) (Tank Temperature Probe Anomaly → Water Pump-out Anomaly (water Remains In The Dishwasher) → Boiler Heating Anomaly (does Not Heat) → Boiler Emptying Anomaly)
×
NELSON AD60 Passthrough Dishwasher
| General | Details |
|---|---|
| Name | NELSON AD60 Passthrough Dishwasher |
| Make | NELSON |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.52 MB |

nelson AD40 Commercial Dishwasher


BOSCH SPH4HKX10E Dishwasher

FISHER and PAYKEL DD24SCTB9 N Dishwasher

IKEA 804.756.07 RENGÖRA Integrated Dishwasher

KitchenAid W11373417 Dishwasher

BOSCH SMI2HTS02G Dishwasher

BOSCH SMS6EMI65Q Dishwasher

SHARP SDW6888JS Smart Dishwasher

FISHER PAYKEL DD60ST4NX9 Single Dishwasher

BOSCH SMS26DI00T Dishwasher

BOSCH SBI4HCS48E Dishwasher
Table of Contents
- 1. Product Identification - Application, General Functions And ... →
- 2. Important Information - Safety →
- 3. Product Identification - Application, General Functions And ... →
- 4. Description Of The Appliance - Cover (top) →
- 5. Symbols Used In The Manual →
- 6. Safety Precautions And Instructions - Correct Installation →
- 7. Safe Use →
- 8. Correct Maintenance →
- 9. Product Characteristics - Overall Dimensions →
- 10. Technical Characteristics - Electricity Supply →
- 11. Preparing The Appliance For Use - Positioning And Installati... →
- 12. Page 12 →
- 13. Connection To The Water Supply - Drain Connection →
- 14. Connection To The Electricity Supply →
- 15. First Start-up - Preparing For Use →
- 16. Control Panel - On-off Button →
- 17. Set-up - Dishwasher Parameter Modification Procedure →
- 18. Modifiable Parameters - Rinsing Temperature →
- 19. Regeneration Frequency Setup (models With Softener) - Mains ... →
- 20. Thermostop - High Speed (fst) Or Economy (eco) Filling (fill... →
- 21. Service Setting (for After-sales Service Only) - Accessing T... →
- 22. Malfunctions Shown On The Display (for The Technician) - Tan... →
- 23. Menu Service Wrong Setting - Check Cleanliness Of The Rinse ... →
- 24. Instructions For The User - Control Panel →
- 25. Before Washing - Check →
- 26. First Use Each Day (tank And Boiler Empty) - Load The Dishes →
- 27. Cycle In Progress - Unload The Dishes →
- 28. Operating Anomalies - Program Change →
- 29. Choosing The Program - Program Type Of Dirt →
- 30. Glasses - Cutlery →
- 31. Maintenance And Cleaning - N.b. →
- 32. Cleaning The Filter During The Day - Total Pump-out At The E... →
- 33. Topping Up With Regenerating Salt (for Models With Softener)... →
- 34. Troubleshooting - The Dishwasher Does Not Start →
- 35. Insufficient Rinse - Insufficient Drying →
- 36. Malfunctions Shown On The Display (for The User) - Tank Temp... →






































