Home > Westinghouse > Westinghouse WSF6608XB Dishwasher
Westinghouse WSF6608XB Dishwasher
INSTALLING THE MACHINE
Water drain hose
WARNING
The water drain hose can be
Electrical Connection
connected either directly to the
water drain hole or to the sink
outlet spigot. Using a hose hook (if
available), the water can be drained
directly into the sink by positioning
the hose hook over the edge of the
sink.
The plug of your machine should be connected to an earthed outlet that
supplies suitable voltage and current. If there is no earthing installation,
have a competent electrician carry out an earthing installation. In case of
usage without earthing installed, our company will not be responsible for
any loss of usage that might occur.
The indoor fuse current value should be 10-16 A.
This connection should be at
a minimum of 50 cm and at a
maximum of 110 cm above the base
of the dishwasher.
Floor level
Your machine is designed for 220-240 V. The machine
should not be plugged in during installation.
Always use the molded plug supplied with your machine.
Running in low voltage will cause a decline in
washing quality.
WARNING
The machine’s electrical cable should be replaced by an authorised service
or an authorised electrician only. Failure to do so may lead to accidents.
Maximum drain hose length is 4m. Longer hose length will prevent
correct draining, and result in poor wash performance.
For safety purposes, always make sure to disconnect the plug when a
wash program is finished.
In order not to cause an electric shock, do not unplug when your hands are
wet.
When disconnecting your machine from the mains supply, always pull
from the plug. Never pull the cord itself.
Fitting the machine undercounter
If you wish to fit your machine undercounter, check whether you have
sufficient space under your countertop and whether the wiring-plumbing
is suitable to do so.
To ensure the stability of the dishwasher for an underbench installation,
if the underbench dimension is greater than 820mm, any gap between
the dishwasher and the underside of the benchtop should be bridged
with a packing piece. This may be achieved by wedging a piece of timber
between the dishwasher and the benchtop as shown.
Timber
Filler piece cut to
wedging
suit installation
piece
Bench top
3mm gap
INSTALLING THE MACHINE
9
| General | Details |
|---|---|
| Name | Westinghouse WSF6608XB Dishwasher |
| Make | Westinghouse |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.8 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Westinghouse WSF6602XB 14 Place Dishwasher
Westinghouse WSF6606 Dishwasher
Westinghouse WSF6604WA Dishwasher
Westinghouse WSF6604XB Dishwasher
Westinghouse WSF6606XB Dishwasher
Westinghouse WSU6608XB Dishwasher
Westinghouse WSF6608KXB Sensor Wash Dishwasher
Westinghouse WSF6602WB Dishwasher
Westinghouse WSF6606KXB Dishwasher
Westinghouse WSF6604WB Dishwasher
NEFF S155HVX00G Integrated Dishwasher
rhima RU-50 Under Bench Dishwasher
BOSCH SBH4ECX21E Dishwasher
Monsher MD 4502 Dishwasher
BOSCH SHE4AEM2N Dishwasher
little tikes 663741 First Dishwasher
MORA IM6465S Integrated Dishwasher
CAFE CDD220P2WS1 Smart Drawer Dishwasher
Respekta GSP60IBAV Dishwasher
FISHER PAYKEL DW60FC1X2 Dishwasher