Whirlpool W11323304H Heavy Duty Dishwasher
Other Parts Needed (not provided):
3/8" (9.5 mm) Compression x
First-Time Installations
3/4" (19 mm) Hose Fitting
with rubber seal and 90°
elbow (required to properly
connect household water line
to the dishwasher.)
Check local codes. Check existing electrical supply. See the
“Electrical Requirements” section. It is recommended that
electrical connections be made by a licensed electrical installer.
Additional Tools Needed:
Part no: W10685193
Household Wiring (Metallic)
Strain Relief to fit 7/8"
(22 mm) hole (required to
properly secure household
wiring to the dishwasher
terminal box.)
Small tubing cutter
Wire stripper
Part no: 4396672
NOTE: Use only UL Listed/
CSA Approved parts.
Optional Accessory Parts Available:
Moisture Barrier Tape
NOTE: Moisture barrier tape
is an optional, added level
of protection if installing a
dishwasher under a wooden
countertop. If a moisture
barrier is supplied with the
unit, the moisture barrier
should be installed on the
underside of any wooden,
particle board, or laminate
countertops to prevent
potential long term damage.
The moisture barrier is not
required for countertops made
from materials such as granite,
stone, and marble.
Cordless drill
1/2" (12.7 mm), 3/4" (19 mm),
and 11/2" (38 mm) hole saw
bits
Additional Parts Needed (not provided):
Type A installation (dishwasher installed close to water/drain
source):
Copper Tubing (3/8" [9.5 mm]
O.D. suggested) or Flexible
Braided Water Supply Line Kit.
Kit includes braided hose and
3/8" (9.5 mm) compression x
3/4" (19 mm) hose fitting.
Part no: W10278635RP
Screw-Type Clamps 11/2"-2"
(38 mm-50 mm) (3 maximum)
Part no: 4396277
Side Panel Kit
For enclosing the side of the
dishwasher when installing it
at the end of your cabinetry
(Whirlpool part number varies
with color).
Optional-Longer Drain Hose
(Maximum length 12 ft (3.7 m)
NOTE: Must meet
AHAM/IAPMO test standards,
fit 1" (25 mm) drain
Call us at our toll-free number or visit the brand website listed in
the Quick Start Guide for accessory and part information.
connection, and be resistant
to heat and detergent.
Part no: W11381654
NOTE: If using a flexible braided hose, replace inlet hose after
5 years to reduce the risk of hose failure. Record hose installation
or replacement dates on the hose for future reference.
NOTE: Be sure to purchase only Whirlpool factory-certified
parts and accessories for your appliance. Your installation may
require additional parts. To order, refer to the contact information
referenced in your Quick Start Guide.
Type B installation (dishwasher installed far away from
water/drain source):
Applicable water supply line and drain hose will be provided by
installer.
9
| General | Details |
|---|---|
| Name | Whirlpool W11323304H Heavy Duty Dishwasher |
| Make | Whirlpool |
| Language | English |
| Filetype | PDF (Download) |
| File size | 11.68 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Whirlpool 2B19 Dishwasher
Whirlpool WFO3O33PLAUS Standard Dishwasher
Whirlpool W11323304G Dishwasher
Whirlpool WH7IPC15BM60 Dishwasher
Whirlpool FINPUTSAD Dishwasher
Whirlpool W7U HS31 X Dishwasher
Whirlpool Thron Dishwasher
Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher
Whirlpool WRF540CWHZ Dishwasher
Whirlpool W10901596A Dishwasher Internet Connectivity
FISHER and PAYKEL DD60SCW9 DishDrawer Dishwasher
COMFEE CDC22P Mini Dishwasher
FISHER PAYKEL DD24SCTW9N Dishwasher
BOSCH SMS4HMW06E Dishwasher
FISHER PAYKEL DD24DI9N Sanitize Dishwasher
FISHER and PAYKEL DD24SCTB9_N Dishwasher
ATAG VA8214LU Dishwasher
HAVA R01 Compact Dishwasher
BOSCH SMI2ITB33E Dishwasher
BLAUPUNKT 5VS401AU Dishwasher