Home > Whirlpool > Whirlpool W11323304H Heavy Duty Dishwasher

Whirlpool W11323304H Heavy Duty Dishwasher

To remove the terminal box, depress the plastic latch, slide the  
box toward the left of the unit along the metal tube and rotate the  
left side of the box forward. Make sure that the product wiring is  
still attached within the terminal box.  
WARNING  
19. Remove terminal box cover  
Terminal  
box cover  
Electrical Shock Hazard  
Electrically ground dishwasher.  
Connect ground wire to green ground connector in  
terminal box.  
Do not use an extension cord.  
Failure to follow these instructions can result in death,  
fire, or electrical shock.  
Using 1/4" (6.4 mm) nut driver remove the screw holding the  
terminal box cover. Remove the cover by lifting it out of the box.  
Keep the cover for later use.  
21. Connect ground wire  
20. Install strain relief  
Ground  
connector screw  
Ground  
wire  
Washer  
Ground  
screw  
Route power cord through strain relief in the back of the terminal  
box. Remove the ground connector screw on the raised floor  
inside the box and place it through the ring terminal of the green  
ground wire of power cord. If wire has no ring terminal, bend a  
loop in the end of the wire. See below figures for detailed graphics  
to properly terminate product to home wiring. Reattach and tighten  
the ground connector screw to the raised floor of the box.  
Install a UL Listed/CSA Approved metallic strain relief. Make  
sure screw heads are facing up when tightening conduit nut.  
Strain relief is provided with the power cord kit.  
Suggested wire length relative to strain relief  
41/2  
"
(114.3 mm)  
22. Connect remaining wires  
0.75" - 1"  
(19 mm - 25 mm)  
White wire  
White wire  
Ground wire  
Black wire  
Black wire  
To connect wires with ring terminals, remove the screws from the  
terminal block, place the screw through the ring terminals, and  
reattach screws back into the terminal block.  
To connect wires without ring terminals, remove the screws from  
the terminal block. Bend a loop in the end of the wires. Push the  
screws through the loop. See below figures for detailed graphics  
to properly terminate product to home wiring. Return the screws to  
the terminal block. Tighten the screws.  
18  
GeneralDetails
NameWhirlpool W11323304H Heavy Duty Dishwasher
MakeWhirlpool
LanguageEnglish
FiletypePDF (Download)
File size11.68 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Whirlpool 2B19 Dishwasher
Whirlpool 2B19 Dishwasher
Whirlpool WFO3O33PLAUS Standard Dishwasher
Whirlpool WFO3O33PLAUS Standard Dishwasher
Whirlpool W11323304G Dishwasher
Whirlpool W11323304G Dishwasher
Whirlpool WH7IPC15BM60 Dishwasher
Whirlpool WH7IPC15BM60 Dishwasher
Whirlpool FINPUTSAD Dishwasher
Whirlpool FINPUTSAD Dishwasher
Whirlpool W7U HS31 X Dishwasher
Whirlpool W7U HS31 X Dishwasher
Whirlpool Thron Dishwasher
Whirlpool Thron Dishwasher
Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher
Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher
Whirlpool WRF540CWHZ Dishwasher
Whirlpool WRF540CWHZ Dishwasher
Whirlpool WDF130PAHB Dishwasher
Whirlpool WDF130PAHB Dishwasher

Whirlpool W11323304H Heavy Duty Dishwasher