Whirlpool WDFS3R4NWESG Sense Dishwasher
EN
PROBLEMS POSSIBLE CAUSES
The dishwasher
SOLUTIONS
No water in the water supply or the tap is closed. Make sure there is water in the water supply and the water tap is open.
does not fill the
water.
The display shows:
The water inlet hose is kinked.
Check the inlet hose (see INSTALLATION). Close the door and press START/Pause button.
H O and is lit;
acoustic alarm
sounds.
2
The screen in the water inlet hose is clogged; it is
necessary to clean it.
Check and clean the screen in the water inlet hose. Close the door and press START/Pause button.
The dishwasher
finishes the cycle
prematurely.
Clean the filter and descale the appliance (see CLEANING THE FILTER ASSEMBLY and DESCALE
INSTRUCTION).
Filter is clogged with food residues or limescale
Check if the end of the drain hose is placed at the correct height (see INSTALLATION). Check for
siphoning into the home sewage system, and install a siphon breaker/air admittance valve if
necessary.
The display shows: Drain hose positioned too low or siphoning into
F8 E3
the home sewage system.
The detergent has not been measured out correctly or it is not suitable for use in dishwashers
(see FILLING THE DETERGENT DISPENSER).
An excessive amount of foam is present.
Air in the water supply.
Check water supply for leaks or other issues letting air inside.
The dishes are not
dried well.
Make sure the rinse aid dispenser is filled (see FILLING THE RINSE AID DISPENSER). Multifunctional
tablets only will not provide as good drying effects as the actual use of liquid rinse aid.
Rinse aid is not present or the dosage is too low.
The dishes have been unloaded after the door
was opened automatically but before the actual better drying results, it is recommended to let the dishes sit inside the dishwasher with the door
Make sure the cycle has ended before starting to unload the dishes (see DAILY USE). For even
cycle end.
open for additional 15 minutes after the cycle ends.
If you notice puddles of water inside cavities of cups, mugs or bowls, try loading the dishes (es-
pecially in the upper rack) providing more inclination to let larger amounts of water drip down
before drying starts.
The dishes are sitting too flat.
Please check in the Programs Table if the selected program is equipped in the drying phase.
A cycle without the drying phase may not deliver desired drying efficiency, so it is recommend-
ed to change cycle selection for the one that has the drying phase.
The selected cycle does not have the drying
phase.
The dishes are made of non-stick or plastic.
Some water drops remaining on this type of material are normal.
Dishes and glasses
have blue streaks or Rinse aid dosage is excessive.
bluish tinges.
Adjust the dosage to a lower setting.
Refill the reservoir with salt as soon as possible. Using the appliance without salt may cause
damage to its internal components.
The salt reservoir is empty.
Dishes and glasses
are covered with
limescale or a whit-
ish film.
The water hardness setting is too low.
Increase the setting (see WATER HARDNESS TABLE).
The cap of the salt reservoir is not properly
closed.
Check and close the salt reservoir cap.
The rinse aid reservoir is empty or the rinse aid
dosage is insufficient.
Refill the dispenser with rinse aid and check the dosage setting (for more information - see FILLING
THE RINSE AID DISPENSER).
The dishwasher
shows F8 E5
Valve is blocked or faulty.
Close the water tap, if possible. Do not switch off the power supply. Call the service.
Policy and standard documentation and additional product information can be found by:
•
•
Alternatively, contact our After-sales Service (See phone number in the warranty booklet).
When contacting our After-sales Service, please state the codes provided on your product’s identification plate.
IEC 436
:
Register your product online
Scan QR Code or visit:
to register your product warranty online.
This QR Code is only applicable to Hong Kong.
For more information, please contact our
Customer Service Hotline: (852) 2406 9138
Save the plant and register your product warranty online!
Enjoy extra 1-month free warranty upon online registration.
Hong Kong
Scan QR Code or visit:
to register your product warranty online.
This QR Code is only applicable to Singapore.
For more information, please contact our
Customer Service Hotline: +65 6250 6888 or
Email: helpdesk.sg@whirlpool.com
400011687075
Singapore
08/2023 ks - Xerox Fabriano
12
| General | Details |
|---|---|
| Name | Whirlpool WDFS3R4NWESG Sense Dishwasher |
| Make | Whirlpool |
| Language | English |
| Filetype | PDF (Download) |
| File size | 6.06 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Whirlpool 2B19 Dishwasher
Whirlpool WFO3O33PLAUS Standard Dishwasher
Whirlpool W11323304G Dishwasher
Whirlpool WH7IPC15BM60 Dishwasher
Whirlpool FINPUTSAD Dishwasher
Whirlpool W7U HS31 X Dishwasher
Whirlpool Thron Dishwasher
Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher
Whirlpool WRF540CWHZ Dishwasher
Whirlpool W10901596A Dishwasher Internet Connectivity
BOSCH SMH4ECX10E/01 Fully Dishwasher
Electrolux EEC67310L Comfortlift Airdry Total Dishwasher
GAGGENAU DF481100F 400 Series Dishwasher
BOSCH SHP9PCM5N Custom Panel Dishwasher
IKEA SODERBODA Integrated Dishwasher
AEG FSK73767P Dishwasher
BOSCH SHX78CM2N Dishwasher
GE APPLIANCES PDT755SYV/BTV UltraFresh System Dishwasher with Interior
JENNAIR W11680101A Dishwasher
FISHER and PAYKEL DW60U4HI2 Dishwasher