Whirlpool WDFS3R4NWESG Sense Dishwasher
EN
DAILY USE
1. CHECK WATER CONNECTION
MODIFYING A RUNNING PROGRAM
Check that the dishwasher is connected to the water supply and that
the tap is open.
If a wrong program was selected, it is possible to change it, provided
that it has only just begun. RESET the machine: press and hold the ON/
OFF button for more than 3. sec., and the machine will switch off. The
dashboard will show “0:01”. Wait until drain cycle ends (around 1 min-
ute). Switch the machine back on using the ON/OFF button and select
the new wash cycle and any desired options. Start the cycle by pressing
the START/Pause button.
2. SWITCH ON THE DISHWASHER
Press the ON/OFF button.
3. LOAD THE RACKS (see LOADING THE RACKS).
4. FILL THE DETERGENT DISPENSER
5. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE
Select the most appropriate program in accordance with the type
of crockery and its soiling level (see PROGRAMS DESCRIPTION) by press-
ing the PREVIOUS/NEXT buttons.
ADDING EXTRA CROCKERY
Without switching off the machine, open the door first slightly to avoid
water splashing out (START/Pause led starts blinking) (Caution!: Hot
steam!) and place the crockery inside the dishwasher. Close the door and
press the START/Pause button, the cycle will resume from the point at
which it was interrupted.
Select the desired options (see OPTIONS AND FUNCTIONS). Not all
options are compatible with all programs.
6. START
Start the wash cycle by closing the door and pressing START/Pause
button (led is lit). When the program starts you hear a single beep.
ACCIDENTAL INTERRUPTIONS
If the door is opened during the wash cycle, or if there is a power cut,
the cycle stops. Close the door and ONLY IF YOU PRESS the START/Pause
button the cycle will resume from the point at which it was interrupted.
7. END OF WASH CYCLE
The end of the wash cycle is indicated by sound and the display
shows END. Switch off the appliance by pressing the ON/OFF button
and opening the door.
Wait for a few minutes before removing the crockery - to avoid burns.
Unload the racks, beginning with the lower one.
ADVICE AND TIPS
TIPS
TIPS ON ENERGY SAVING
Before loading the baskets, remove all food residues from the crockery and
empty the glasses. You do not need to rinse beforehand under running
water.
Arrange the crockery so that it is held in place firmly and does not tip over;
and arrange the containers with the openings facing downwards and the
concave/convex parts placed obliquely, thus allowing the water to reach
every surface and flow freely.
Warning: lids, handles, trays and frying pans should not prevent the
sprayer arms from rotating.
Place any small items in the cutlery basket.
Very soiled dishes and pans should be placed in the lower basket because
in this sector the water sprays are stronger and allow a higher washing
performance.
After loading the appliance, make sure that the sprayer arms can rotate
freely.
• When the household dishwasher is used according to the manufactur-
er’s instructions, washing tableware in a dishwasher usually con-
sumes less energy and water than hand dishwashing.
• In order to maximize dishwasher efficiency, it is recommended to
initiate the wash cycle once the dishwasher is fully loaded. Loading
the household dishwasher up to the capacity indicated by the manu-
facturer will contribute to energy and water savings. Information on the
correct loading of tableware can be found in the Loading chapter.
In case of partial loading, it is recommended to use a dedicated wash
options if available (Half load/ Zone Wash/ Multizone), filling up only
selected racks. Incorrect loading or overloading of the dishwasher may
increase resources usage (such as water, energy and time, as well as
increase noise level), reducing cleaning and drying performance.
• Manual pre-rinsing of tableware items leads to increased water and
energy consumption and is not recommended.
UNSUITABLE CROCKERY
• Wooden crockery and cutlery.
• Delicately decorated glasses, artistic handicrafts and antique crockery.
Their decorations are not resistant.
• Parts in synthetic material which do not withstand high temperatures.
• Copper and tin crockery.
• Crockery soiled with ash, wax, lubricating grease or ink.
The colours of glass decorations and aluminium/silver pieces can change
and fade during the washing process. Some types of glass (e.g. crystal
objects) can become opaque after a number of wash cycles too.
HYGIENE
To avoid odour and sediment which can be accumulated in the dish-
washer please run a high-temperature program at least once a month.
Use a teaspoon of detergent and run it without loading to clean your
appliance.
RESISTANCE TO FROST
If the appliance is placed in surroundings exposed to the risk of frost, it
must be drained completely. Turn off the water tap, remove the inlet and
outlet hoses, and let all the water drain away. Make sure that the water
softener is full of dissolved regeneration salt in the salt container, to
protect the appliance from temperatures of up to -20°C.
DAMAGE TO GLASS AND CROCKERY
• Only use glasses and porcelain guaranteed by the manufacturer as
dishwasher safe.
• Use a delicate detergent suitable for crockery
• Collect glasses and cutlery from the dishwasher as soon as the wash
cycle is over.
If the appliance was stored in frost conditions the appliance must remain at
an ambient temperature of min. 5°C for at least 24 hours before the first run.
8
| General | Details |
|---|---|
| Name | Whirlpool WDFS3R4NWESG Sense Dishwasher |
| Make | Whirlpool |
| Language | English |
| Filetype | PDF (Download) |
| File size | 6.06 MB |

Whirlpool 2B19 Dishwasher

Whirlpool WFO3O33PLAUS Standard Dishwasher

Whirlpool W11323304G Dishwasher

Whirlpool WH7IPC15BM60 Dishwasher

Whirlpool FINPUTSAD Dishwasher

Whirlpool W7U HS31 X Dishwasher

Whirlpool Thron Dishwasher

Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher

Whirlpool WRF540CWHZ Dishwasher

Whirlpool WDF130PAHB Dishwasher

























