Home > WISBERG > WISBERG WBDW44DB Dishwasher

WISBERG WBDW44DB Dishwasher

PROBLEM  
POSSIBLE CAUSE  
POTENTIAL SOLUTION  
There are white marks The dishwasher salt must be topped up.  
on the tableware.  
Refill the dishwasher salt. Follow the instructions  
in chapter 3.5.3.Add the dishwasher salt.  
The water softening level is incorrectly set.  
Too much dishwasher detergent was used.  
Set the water softening level to the water  
hardness in your region. Follow the instructions  
in chapter 3.5.1.Setting the water hardness.  
Follow the dishwasher detergent instructions  
for the correct amount of dishwasher detergent  
per wash.  
Dishwasher detergent Tableware is blocking the dishwasher  
Move the tableware which causes the  
problem.  
remains in the  
dishwasher detergent  
reservoir.  
detergent reservoir.  
The dishes are not dry. The dishes are not properly placed in the racks. Follow the instructions in chapter 4.1.Putting the  
dishes in the dishwasher.  
The dishes were taken out of the appliance too Wait a few minutes after the end of the  
soon.  
programme before removing the dishes from  
the appliance.  
The selected programme does not have a  
drying phase.  
Choose a programme with a drying phase.  
ERROR MESSAGES ON THE  
DISPLAY  
POSSIBLE CAUSE  
POTENTIAL SOLUTION  
E1  
The water pressure is low.  
Check that the supply hose is connected  
correctly. Fully open the stop cock.  
E3  
E4  
The heating element is defective.  
There is a leak somewhere.  
An authorised service technician is needed to  
solve the problem. Please contact customer  
service.  
1. Unplug the power cable from the  
earthed socket.  
2. Check that the supply hose is connected  
correctly. Fully open the stop cock.  
Close the door properly.  
1. Unplug the power cable from the  
earthed socket.  
2. Check whether the discharge hose is  
blocked.  
1. Unplug the power cable from the  
earthed socket.  
2. Check whether the water drainage is  
blocked.  
3. Remove excess water from the bottom  
of the appliance before switching it on  
again.  
Ed  
No contact can be made between the  
circuit board and the display.  
An authorised service technician is needed to  
solve the problem. Please contact customer  
service.  
52  
GeneralDetails
NameWISBERG WBDW44DB Dishwasher
MakeWISBERG
LanguageEnglish
FiletypePDF (Download)
File size14.76 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
WISBERG WBDW40CW Dishwasher
WISBERG WBDW40CW Dishwasher

WISBERG WBDW44DB Dishwasher