WISBERG WBDW44DB Dishwasher
2. Pull off the bottom spray arm.
3. Clean the top spray arm and the bottom spray arm under running
water. Use a washing-up brush to remove stubborn dirt.
4. Use a narrow and pointed stick to remove the dirt from the holes.
5. Place the top spray arm and the bottom spray arm back into the
appliance.
6. TROUBLESHOOTING
WARNING!
ELECTROCUTION HAZARD DUE TO SHORT CIRCUIT. Do not perform any repairs to the appliance that are not described in
this manual. The appliance may only be repaired by an authorised service technician.
Some problems can be easily solved by yourself using the table below. If the descriptions below do not solve your problem,
please contact our customer service team: www.wisberghome.com
PROBLEM
POSSIBLE CAUSE
POTENTIAL SOLUTION
The appliance will not
start.
The power cable is not connected to an
earthed socket.
Plug the power cable into an earthed socket.
The RCD is switched off.
The water pressure is low.
Switch RCD on.
Check that the supply hose is connected
correctly. Fully open the stop cock.
The circle behind the sight glass of the aqua An authorised service technician is needed to
stop is red instead of orange. The aqua stop or solve the problem. Please contact customer
appliance is defective.
service.
The door is not properly closed.
The holes in the spray arms are blocked.
Close the door properly.
Water is leaking from
the appliance.
Clean the spray arms. Follow the instructions in
chapter 5.3.Cleaning the spray arms.
A component of the appliance is defective.
An authorised service technician is needed to
solve the problem. Please contact customer
service.
50
| General | Details |
|---|---|
| Name | WISBERG WBDW44DB Dishwasher |
| Make | WISBERG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 14.76 MB |

WISBERG WBDW40CW Dishwasher







































