AEG F8642FI Fully Integrated Tall Tub Dishwasher
Detergent usage
If you encounter problems when using
combined detergents, please contact the
detergent manufacturer.
When you stop using combined detergents,
make sure that water hardness and rinse
aid settings are set to the correct level.
Only use detergents specifically designed
for domestic dishwashers. Keep your
detergents in cool, dry places out of reach
of children.
Add the proper detergent for the selected
program to ensure the best performance.
The amount of detergent needed depends
on the cycle, load size, and soil level of
dishes.
Do not fill detergent into the detergent
compartment more than required; otherwise
you can see whitish streaks or bluish layers
on glass and dishes and may cause glass
corrosion. Continued use of too much
detergent may cause machine damage.
Using little detergent can result in poor
cleaning and you can see whitish streaks in
hard water.
Rinse-aid usage
The rinse aid helps to dry the dishes
without streaks and stains. Rinse-aid is
required for stain-free utensils and clear
glasses. The rinse aid is automatically
released during the hot rinse phase. If
rinse aid dosage setting set too low, whitish
stains remains on dishes and dishes do not
dry and washed clean. If rinse aid dosage
setting set too height, you can see bluish
layers on glass and dishes.
Filling the rinse-aid and setting
See the detergent manufacturer’s
instructions for a further information.
To fill the rinse aid compartment, open
the rinse-aid compartment cap. Fill the
compartment with rinse aid to the MAX
level and then close the cap. Be careful not
to overfill the rinse aid compartment and
wipe up any spills.
Filling the detergent
Push the latch to open the dispenser and
pour in the detergent.
Close the lid and press it until it locks in
place. The dispenser should be refilled just
before the start of each programme. If the
dishes are heavily soiled, place additional
detergent in the detergent chamber.
In order to change the rinse aid level,
follow the below steps
1. Open the door of the machine,
2. Press and hold “Start/Pause + On/Off”
key for 3 seconds,
3. Immediately after the machine gives an
audible warning, release "Start/Pause
+ On/Off" key, press and hold "Program
Selection + Cancel" key until "rA" is
represented on the display. The machine
will display the last setting,
DETERGENT
4. The amount of rinse aid is adjusted by
pressing “Program Selection + Cancel”
key,
Using combined detergents
These products should be used according
to the manufacturer’s instructions.
Never put combined detergents into the
interior section or the cutlery basket.
Combined detergents contain not only
the detergent but also rinse-aid, salt
replacement substances and additional
components depending on the combination.
5. After the adjustment, turn off (by pressing
Start/Pause + On/Off key) the machine
to save the selected rinse aid amount.
The factory setting is “4”.
If the dishes are not drying properly or are
spotted, increase the level. If blue stains
We recommend you do not use combined
detergents in short programmes.
Please use powder detergents in such
programmes.
form on your dishes, decrease the level.
USA-CAN - 14
| General | Details |
|---|---|
| Name | AEG F8642FI Fully Integrated Tall Tub Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.2 MB |

AEG FSK76748P Dishwasher

AEG FSK53617Za Dishwasher

AEG FSK74747P Dishwasher

AEG FSE73507P Dishwasher

AEG GS60AIM Dishwasher

AEG FSB73427Z Dishwasher

AEG FSE74737P Quickselect Dishwasher

AEG FFB73727PM Dishwasher

AEG F8642FI Tall Tub Dishwasher

AEG FFE83800PM Dishwasher


















































