AEG FSK94858P Dishwasher
Problem and alarm code
Possible cause and solution
The programme lasts too long.
•
If the delay start option is set, cancel the delay setting or wait for the
end of the countdown.
•
•
Activating options often increases the programme duration.
The displayed programme duration
is different than the duration in the
consumption values table.
The pressure and the temperature of the water, the variations of the
mains supply, the options, the quantity of dishes and the degree of soil
can change the programme duration.
The remaining time in the display in‐
creases and skips nearly to the end
of the programme duration.
•
This is not a defect. The appliance is working correctly.
Small leak from the appliance door.
•
•
The appliance is not levelled. Loosen or tighten the adjustable feet (if
applicable).
The appliance door is not centred on the tub. Adjust the rear foot (if ap‐
plicable).
The appliance door is difficult to
close.
•
The appliance is not levelled. Loosen or tighten the adjustable feet (if
applicable).
•
•
Parts of the tableware are protruding from the baskets.
The appliance door opens during
the wash cycle.
The AirDry function is activated. You can deactivate the function. Refer
to "Basic settings".
Rattling or knocking sounds from
the inside of the appliance.
•
The tableware is not properly arranged in the baskets. Refer to basket
loading leaflet.
•
•
Make sure that the spray arms can rotate freely.
The appliance trips the circuit-beak‐
er.
The amperage is insufficient to supply simultaneously all the applian‐
ces in use. Check the socket amperage and the capacity of the meter
or turn off one of the appliances in use.
•
•
Internal electrical fault of the appliance. Contact an Authorised Service
Centre.
The appliance is switched on but
does not operate.
The display shows Power Fail.
Power supply is out of the operating range. The wash cycle is tempora‐
rily interrupted and resumes automatically once the power is restored.
The appliance switches off during
operation.
•
•
Complete power outage. The wash cycle is temporarily interrupted and
resumes automatically once the power is restored.
The display shows Updating. All
buttons are inactive except for the
on/off.
The appliance downloads and installs the firmware update automatical‐
ly when it is available. The display shows Updating for the duration of
the updating process. Wait for the process to be complete. If you inter‐
rupt the update process by deactivating the appliance, it resumes when
you activate the appliance.
The firmware update does not change the appliance performance dec‐
laration values.
Once you have checked the appliance,
deactivate and activate the appliance. If the
problem occurs again, contact an Authorised
Service Centre.
For alarm codes not described in the table,
contact an Authorised Service Centre.
30 ENGLISH
| General | Details |
|---|---|
| Name | AEG FSK94858P Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.14 MB |
(1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
BOSCH SMS46NI10M Dishwasher
BOSCH SMS24AI01A Free Standing Dishwasher
BOSCH SMV8ZCX00X Dishwasher
smeg DF344BW Sommario Dishwasher
FISHER AND PAYKEL DD60STX6I1 Dish Drawer Dishwasher
BOSCH SGE53C55UC Dishwasher
BOSCH SMV6HVX01I Integrated Dishwasher
BOSCH SMS4EVI14E Dishwasher
Hotpoint H7F HS51 Dishwasher
GE APPLIANCES GDT670SGV Interior Dishwasher with Hidden Controls