beko DFN05R10W Dishwasher
3
Installation
To make the product ready for use,
•
•
Do not install the product at places
where temperature may fall below 0ºC.
Place the product on a rigid floor. Do
not place it on a long pile rug or similar
surfaces.
make sure that the electricity, tap water
supply and water drainage systems are
appropriate before calling the Authorised
Service Agent. If they are not, call a
qualified technician and plumber to have
any necessary arrangements carried out.
Ensure the power cable does
not get trapped under the
B product.
Preparation of the location
and electrical, tap water and
C waste water installations at the
•
•
Make sure that you select a location
that will allow you to load and unload
the dishes in a fast and comfortable
manner.
place of installation is under
customer's responsibility.
Manufacturer shall not be held
responsible for damages arising
B from processes carried out by
Install the product in a place close
to the tap and the drain. Select the
installation location by considering
that it will not be changed after the
connections are made.
unauthorised persons.
Prior to installation, visually
check if the product has any
A defects on it. If so, do not have
Connecting water supply
•
Do not use old or used water inlet
hose on the new product. Use the new
water inlet hose supplied with the
product.
it installed. Damaged products
cause risks for your safety.
Make sure that the water inlet
and discharge hoses are not
•
Connect the water inlet hose directly
to the cold water tap. Permitted water
temperature up to 25°C. Pressure
coming from the tap should be
minimum 0.3 and maximum 10 bars.
If the water pressure exceeds 10
bars, a pressure relief valve should be
installed in between.
C folded, pinched or crushed
while pushing the product into
its place after installation or
cleaning procedures.
When placing the product, pay attention
not to damage the floor, walls, piping, etc.
Do not hold the product from its door or
panel to move it.
•
Open the tap completely after making
the connections to check for water
leaks.
Appropriate installation
location
For your safety, close the water
inlet tap completely after the
A washing programme is over.
•
Place the product on a solid and flat
floor that has sufficient load carrying
capacity! The product must be
installed on a flat surface in order for
the door to be closed comfortably and
securely.
Connection to the drain
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection
Dishwasher / User’s Manual
EN
9 / 35
| General | Details |
|---|---|
| Name | beko DFN05R10W Dishwasher |
| Make | Beko |
| Language | English |
| Filetype | PDF (Download) |
| File size | 9.48 MB |
(1 votes, average: 5.00 out of 5)
Loading...
beko DUT25401WHW Front Pocket Handle Dishwasher
beko BDIN38522Q Dishwasher
beko BDFN26450A Dishwasher
beko BDFS26046XQ Dishwasher
beko BDFN26521XQ Dishwasher
NMG0724BEKODI Dishwasher
beko 943711 Dishwasher
beko DIN15210 Full-Size Dishwasher
beko 57 6190 0000 Tall Tub Dishwasher
beko BDIN38650C Dishwasher
LG LD-2130-1-W-S-M-H Dishwasher
SIEMENS SX75EX11CE Fully Integrable Dishwasher
FISHER PAYKEL DD60SHI9 Dishwasher
BOSCH 81739 Dishwasher
Whirlpool WDF130PAHB Dishwasher
Fisher and Paykel DW60UN4B2 Built-Under Dishwasher
FISHER PAYKEL DD24SCTW9 N Single DishDrawer Dishwasher
Omega ODW702X DishWasher
BOSCH SGS4HVI31E Dishwasher
BOSCH SMD8YCX01G Fully- Dishwasher