beko DFN05R10W Dishwasher
Preparation
c
a
b
d
e
f
1 min.
1 Second
1 Minute
Remove the test Turn on the tap and
Hold the test strip in Remove the test
the water for about strip from the water
Wait for 1 minute. The test strip shows
strip from the
packet.
let the water run for
about a minute.
you the hardness
level.
a second.
and shake it.
After determining hardness level of the supply water:
1. When the Programme Selection key is at “Off” position, keep Start/Pause/Cancel key
pressed and turn the Programme Selection key to position “1” within 5 seconds. Machine will
enter into the regeneration adjustment mode at the end of this period.
2. Regeneration level in the memory will be illuminated for 5 seconds when the regenerator
adjustment mode is activated.
3. To adjust the new Water Hardness Level, move the Programme Selection key to the position
that is suitable for your supply water. (see, “Water Hardness Level Adjustment Table”)
4. Press Start/Pause/Cancel key for once to store the level you have selected. Machine returns
to the normal operating mode after the new setting is stored.
* Programme Selection key rotates in 5 steps regardless of the number of the programmes
contained on the machine.
5. Press “Start/Pause/Cancel” key for once to store the level you have selected.
Water hardness level adjustment table
Position of
Program
Selection Key*
Hardness
Level
English Water German Water French Water
Hardness °dE Hardness °dH Hardness °dF
Water Hardness Level Indicator
0th Level
1st Level
2nd Level
0-5
6-9
0-4
5-7
0-8
1
1
Washing lamp on the panel will
illuminate.
9-13
Drying lamp on the panel will
illuminate.
10-15
16-19
20-24
8-12
13-15
16-19
14-22
23-27
28-34
2
3
4
3rd Level
4th Level
5th Level
End lamp on the panel will illuminate.
Washing, Drying and End lamps on
the panel will illuminate.
Washing, Drying and End lamps on
the panel will flash with an interval of
1 second.
25-62
20-50
35-90
5
If the hardness level of the supply water is above 90 °dF or if you are using well water, then it
is recommended to use water purification devices and special filters.
If the hardness level of the supply water is below 13°dF, there is no need to use salt in your
dishwasher. If this is the case, “No Salt Warning Indicator” (if any) illuminates continuously on
the panel of your machine.
If the water hardness level adjustment is set to level 1, the “No salt warning indicator” will
illuminate continuously although it is not necessary to use salt. If you use salt under this
condition, salt will not be consumed and the Salt indicator will not illuminate.
Dishwasher / User’s Manual
EN
13/35
| General | Details |
|---|---|
| Name | beko DFN05R10W Dishwasher |
| Make | Beko |
| Language | English |
| Filetype | PDF (Download) |
| File size | 9.48 MB |
(1 votes, average: 5.00 out of 5)
Loading...
beko DUT25401WHW Front Pocket Handle Dishwasher
beko BDIN38522Q Dishwasher
beko BDFN26450A Dishwasher
beko BDFS26046XQ Dishwasher
beko BDFN26521XQ Dishwasher
NMG0724BEKODI Dishwasher
beko 943711 Dishwasher
beko DIN15210 Full-Size Dishwasher
beko 57 6190 0000 Tall Tub Dishwasher
beko BDIN38650C Dishwasher
FISHER and PAYKEL DD24DTI9 N Tall Dishwasher
FISHER PAYKEL DW60FC4X2 Sanitise Dishwasher
FISHER PAYKEL DD24STX6PX1 Dishwasher
medion DWT20 mini Dishwasher
BOSCH 800 Series Dishwasher
FISHER AND PAYKEL DW24U6I1 Dishwasher
KitchenAid W10242569C Compactor Dishwasher
Haier HDW13F0S1 Hygiene Dishwasher
FISHER PAYKEL DD24SVT9 Dishwasher
BOSCH 9001884369 Dishwasher