beko DIT39434C2 Fully Integrated Dishwasher
water softener cleaned, and then it will
resume running in drying mode.
Adjusting the amount of rinse aid
1. After switching on your machine, press
the Menu key for 3 second.
6.7 CANCELLING THE
PROGRAM
In some models pressing the Menu key
only for once will allow you to enter the
Settings menu.
Open the door of the product press and
hold the Program Selection / Program
Cancel keys for 3 seconds. After the 3 -
2 - 1 countdown, 0:01 is displayed, close
the door of the product and wait for the
draining process complete. Draining is
completed in 2 minutes and the machine
gives an audible warning when it is
completed.
2. Using <- and +> keys, proceed to “P:”
on the display.
3. Set to the appropriate level with the
Selection key.
4. Press the Menu key to exit the settings
menu. Your setting will be saved
automatically.
There might be residues of detergent
or rinse aid in the machine and/or on
the pieces being washed depending
on the step the program you have
cancelled was in.
No rinse aid dispensed in P:0 wash position.
1 dose of rinse aid is dispensed in P:1
position.
2 doses of rinse aid are dispensed in P:2
position.
3 doses of rinse aid are dispensed in P:3
position.
4 doses of rinse aid are dispensed in P:4
6.8 SALT INDICATOR ( )
(Select Models)
Please check the salt indicator on the
display to see whether there is adequate
amount of softening salt in the dishwasher
or not. You need to refill the salt reservoir
with salt whenever salt indicator appears
on the display of your machine.
Adjusting the water hardness level is
explained in Water Softening System
section.
position.
6.10 END OF PROGRAM
When the program you have selected
comes to an end, an audible warning
signal will warn you to turn off your
machine. This audible signal will warn
you with certain intervals before it
turns off.
End of Program indicator will light up when
the washing program is over.
1. Open the door of the machine.
6.9 RINSE AID INDICATOR (
)
Please check the rinse aid indicator on the
display to see whether there is adequate
amount of rinse aid in the dishwasher or
not. You need to refill the rinse aid reservoir
with rinse aid whenever rinse aid indicator
appears on the display of your machine.
2. Press On/Off key to turn off your
machine.
3. Close the tap.
4. Unplug the machine from the socket.
For energy saving, the machine is
automatically turned off following the
completion of the program or if the
program is not started.
33 USA
| General | Details |
|---|---|
| Name | beko DIT39434C2 Fully Integrated Dishwasher |
| Make | Beko |
| Language | English |
| Filetype | PDF (Download) |
| File size | 7.02 MB |
(1 votes, average: 5.00 out of 5)
Loading...
beko DUT25401WHW Front Pocket Handle Dishwasher
beko BDIN38522Q Dishwasher
beko BDFN26450A Dishwasher
beko BDFS26046XQ Dishwasher
beko BDFN26521XQ Dishwasher
NMG0724BEKODI Dishwasher
beko 943711 Dishwasher
beko DIN15210 Full-Size Dishwasher
beko 57 6190 0000 Tall Tub Dishwasher
beko BDIN38650C Dishwasher
Whirlpool W7I HT58 T Fully Integrated Dishwasher
Electrolux ESA47300UW Dishwasher
CMA EST-FL1 EST Front Loader Water Dishwasher
FAGOR 3LVF-423.1X Dishwasher
FISHER and PAYKEL DD60SDFTX9 Tall, Dishwasher
respekta GSPU42 Mini Table Dishwasher
SIEMENS SN65ZX00AE Dishwasher
Miele HG07 Dishwasher
ELVITA CDM6605X Dishwasher
Miele G 5051 Dishwasher