Home > CMA Dishmachines > CMA DISHMACHINES CMA-180 Rack Straight Dishwasher
CMA DISHMACHINES CMA-180 Rack Straight Dishwasher
4. 180 Conversion Kit – Straight to Corner
#00617.17
INSTRUCTIONS:
ILLUSTRATION #2
1. Open dishmachine door to its highest position so that there is
little spring resistance on the door handle. Remove hardware
that holds the door handle to the door linkage. Save all the
washers and spacers. Swing the door handle towards the
back of the dishmachine and dismount it from the door handle
support brackets. Remove the two nuts attaching the eyebolts
and save the door springs.
2. Remove the two (2) door-handle support brackets on the back
of the cabinet and plug the four holes with original hardware.
Remove front door and replace with left door. Remove door
guides on left side of machine and attaché item No. 9 door
panel-cover. The left door will now be at the front of the
machine. Remove and relocate service door splashguard to
left side of machine. Remove door latch for service door. The
door latch is not needed on the CMA 180-C.
3. With left door facing the front, door panel on the left, and
service door splashguard in place, we are now ready to install
the door handle.
4. Using provided door handle, door handle mounting plates,
5/16” bolts, nuts and washers; install the door handle as shown
in “Illustration #1”. Match the mounting plate holes to the
cabinet holes and insert all bolts to ensure that the door handle
and mounting plates are aligned. Then secure the mounting
plate with nuts and washers.
ITEM
NO.
NO.
REQ’D
P/N
DESCRIPTION
Door Handle
1
2
1
1
1
1
9
9
1
2
8
1
1
1
00613.04
00619.34
00619.44
00603.04
00913.00
00926.00
00900.00
00607.04
00920.00
17506.50
00563.20
17507.10
Door Hdl. Mtng. Plate-Long
Door Hdl. Mtng. Plate-Short
Door Spring Extension
5/16” – 18” Nut
2A
3
Note: You may install one of the mounting plates first, then insert
the door handle pivot post in and mount the other mounting plate
last.
4
5
5/16” SS washer
5. Attach the provided extension rod to the back of the door
handle.
Attach one eyebolt to the frame with existing
6
Cotter Pin
hardware, along with two springs together. Pivot the door
handle, positioning handle straight up. You may now connect
loop of 2nd spring to the door extension rod. Pull handles
forward and down and attach to the door links.
7
Door Handle Grip
8
5/16”-18 x ¾” Hex Head Bolt
Door Panel-Cover
9
6. Adjust the nut on the eyebolt until the doors begin to lift then
back off two turns. See “Illustration #2” for proper location of
all door handle hardware included on CMA 180C.
10
11
Roller Switch Bracket
Air Gap Baffle CMA 180C
7. “Illustration #3” shows CMA 180-S and CMA 180-C “Door
Handle Assembly”.
ILLUSTRATION #3
Back View
ILLUSTRATION #1
Back View
Note: Door handle mounting plates come in two sizes.
Longer is mounted on back-right side.
Model CMA-180 Parts Manual Rev. 2.09
Buy Parts
page 25
| General | Details |
|---|---|
| Name | CMA DISHMACHINES CMA-180 Rack Straight Dishwasher |
| Make | CMA Dishmachines |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.87 MB |
(1 votes, average: 5.00 out of 5)
Loading...
CMA DISHMACHINES EST-44 Conveyor Dishwasher
CMA DISHMACHINES CMA-180UC Under Counter Dishwasher
CMA DISHMACHINES EST-AH Door Type Rack Low Dishwasher
CMA DISHMACHINES UC65e M3 Dishwasher
CMA DISHMACHINES CMA-180VL Dishwasher
CMA DISHMACHINES UC50e Dishwasher
CMA DISHMACHINES CMA-180 Dishwasher
CMA DISHMACHINES CMA-180UC Dishwasher
CMA DISHMACHINES H-1X Undercounter Dishwasher
CMA DISHMACHINES 180UC-3 Under Counter Dishwasher
FISHER PAYKEL DD24DCTB9_N Tall Dishwasher
ZLINE Kitchen DWMT Monument Dishwasher
Respekta GSP60IBAV Dishwasher
Hotpoint H2I HD526 UK Dishwasher
Hotpoint H7F HP43 X UK 15 Place Setting Dishwasher
FAGOR 3LVF-423.1X Dishwasher
eta 239490001B Dishwasher
Whirlpool WDT740SALB Dishwasher
Electrolux ESC68300SX UltimateCare 900 Dishwasher
smeg LSPU8612S Silver Dishwasher