Home > Element > element ENB6632PEBB Dishwasher

element ENB6632PEBB Dishwasher

OPERATING INSTRUCTIONS  
3
Indicator Light  
Delay Start  
To delay the start of a selected cycle, press the Delay  
Start button until the desired delay time shows in the  
LED indicator. This allows you to automatically start  
your dishwasher for a 1 to 24 hour delay.  
Sanitized  
When the "sanitize" option is selected, the temperature  
of the water will reach a maximum of 70°C (158°F).  
To cancel the Delay Start option and begin the cycle  
before the delay period is over, press the Start/Cancel  
button.  
Certified residential dishwashers are not  
intended for licensed food establishments.  
The sanitize cycle is NSF certified.  
Warning: The sanitize option is available  
with Heavy, Normal, Light and ECO cycle.  
4
Start/Cancel  
Push door firmly closed. The door latches automatically.  
Select the wash cycle and options desired, the indicator  
light above the button will turn on. To start, press the  
Start/Cancel button once, the light will turn on and the wash  
action begins. To cancel when a cycle is running, press  
Start/Cancel button once andth e dishwasher will start a 60  
second drain and then shut off. At the end of the  
Clean  
The clean light will turn on at the end of the cycle.  
Status Window  
drain, you can select the desired cycle.  
01-24  
When you want to load more dishes or pause the  
dishwasher while it is already running, make sure to open  
the door slowly and carefully, as there is a possibility of  
injury from the hot steam inside the dishwasher. You can  
add more dishes before the main wash starts. Open the  
door and check the detergent dispenser. If the main wash  
section of the detergent dispenser is still closed, you can  
add items. If the door is opened while the dishwasher is  
running, a safety mechanism is activated and stops the  
cycle.  
If the Delay Start option is selected, the number of  
delay start hours shows in the Status Window. If the  
dishwasher is working and the wash cycle time is more  
than an hour, the number of hours and left, shows  
alternately, in Status Window.  
CL  
Flashes once the program has been entered and the  
Start/Cancel key is pressed. It also flashes if the door is  
opened during a wash cycle. Close the dishwasher  
door to begin or continue a wash cycle.  
5
Child Lock  
MINUTES  
Number of minutes left in a cycle (0-59 or 1H-2H).  
It shows hours and minutes alternately.  
You can lock all controls to prevent children from  
accidently changing the dishwasher cycle or  
starting the dishwasher.  
Press and hold the Delay Start button for 3  
seconds, the lock graphic light will turn on.  
To unlock the control, press and hold the Delay  
Start button for 3 seconds, the lock graphic light  
will turn off.  
Note In standby mode, if there is not any button  
operation or door opening and closing operation for  
3 minutes, the dishwasher will enter a power-saving  
state, all displays will be turned off. If there is any  
button operation or door opening and closing  
operation, the display will be turned on, and the time  
will be counted again for 3 minutes.  
6
GeneralDetails
Nameelement ENB6632PEBB Dishwasher
MakeElement
LanguageEnglish
FiletypePDF (Download)
File size3.41 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
element ENB5322HECW Full Console Dishwasher
element ENB5322HECW Full Console Dishwasher
element ENB5322HECW Dishwasher
element ENB5322HECW Dishwasher
element ENB6631PEBB 18 Inch Dishwasher
element ENB6631PEBB 18 Inch Dishwasher

element ENB6632PEBB Dishwasher