Home > FISHER and PAYKEL > FISHER AND PAYKEL DD60STX6I1 Dish Drawer Dishwasher
FISHER AND PAYKEL DD60STX6I1 Dish Drawer Dishwasher
1
SECURE THE VENTING HOSE TO CABINETRY
VENTING THROUGH CABINETRY
FIT THE CUSTOM PANEL
Measure the distance between the
base of the dishdrawer chassis and the
base of the cavity.
Note 1: If panel is intended to extend
below base of the cavity, adjust dim X as
required
Unframed cabinetry
Route the venting hose to the cutout
and push onto the duct firmly to secure.
Note 2: A 2mm clearance is required
between base of door panel and
cabinetry below (Refer page 11)
x
Push the duct onto the cabinetry and
secure using the four provided screws.
Remove both side pins by twisting a
quarter-turn towards the product front.
Pull outwards to remove pin.
2
3
Framed cabinetry
Route the venting hose to the cutout
and push onto the duct firmly to secure.
Place duct into cutout and insert the
bracket into vent slot. Secure using the
five provided screws.
Carefully pull both brackets from
DishDrawer down and out before
unplugging the Knock-to-Pause modules
from the back of the brackets.
VENTING THROUGH FLOOR
On the back of the panel, offset the
base of the bracket by dimension x
and align to the centre.
4
5
Route the venting hose through
the floor. Ensure any excess hose
is removed.
x
Secure the bracket to the panel using a
minimum of 3 screws on either side.
17
| General | Details |
|---|---|
| Name | FISHER AND PAYKEL DD60STX6I1 Dish Drawer Dishwasher |
| Make | FISHER and PAYKEL |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.91 MB |

FISHER and PAYKEL DD60SCTX9 Dishwasher

FISHER and PAYKEL DD60DDFHX9 Dishwasher

FISHER and PAYKEL DD24SCTB9 N Dishwasher

FISHER and PAYKEL DD60SCTW9 Dishwasher

FISHER and PAYKEL DD60SDFTX9 Dishwasher

Fisher and Paykel DW24UT2I2 Dishwasher

FISHER AND PAYKEL DD24SHTI9N Dishwasher

FISHER AND PAYKEL DD60SDFHTX9 Tall Dishwasher

FISHER AND PAYKEL DD24DTI9 N Dishwasher

FISHER AND PAYKEL DD24STI9 Dishwasher





































