GAGGENAU DF480701F Dishwasher
en-usꢀBefore you begin
Flat screwdriver
2.4ꢀPre-install Checklist
Ensure that the following requirements are met when
planning the installation of your appliance.
Adjustable wrench
WARNING
Avoid Scalding or Electric Shock Hazard
▶ Make sure the water supply and electrical supply are
shut off before installation or service.
▶ Do not allow the electrical and supply lines to touch.
Level
¡ Select a location as close to the sink as possible for
easy access to water supply and drain lines.
¡ Be sure the unit is installed close enough to the sink so
the drain hose length does not exceed 92" (2337 mm)
and so that a portion of the drain hose is raised at least
33" above the floor level.
¡ Ensure that the enclosure is square and the opening is
at least 32 1/8" (817 mm) high and 23 5/8" (600 mm)
wide.
T-15 Star-head
screwdriver
¡ Check that the opening in the cabinet is large enough
for routing the electric cable, water line, and drain hose,
and if not, create a new opening. See
T-20 Star-head
screwdriver
¡ If the opening is wood, be sure it is sanded smooth. If it
is metal, be sure it is covered by a protective gasket.
¡ Be sure that your water heater set at 120° F (49° C)
and the water pressure measures at 15-145 psi (1-10
bar)
Jigsaw
¡ Determine the mounting method based on the
dishwasher model and counter-top type. See .
¡ Only use the included hardware for the installation. If
you are replacing a dishwasher, dispose of old hose
and other equipment properly.
Pencil
¡ To avoid scratching the floor, have floor protection
ready for when the dishwasher will be slid into the
cabinet.
Steel Square
2.5ꢀElectrical Requirements
Ensure that the following electrical requirements are met.
Center Punch
Dishwasher electrical rating
Volts
120
Hertz
60
Parts
Amperes
Watts
12
Shut-off valve and fittings
appropriate for hot water supply
line.
1,440 (max)
Electrical Supply
The customer has the responsibility of ensuring that the
dishwasher electrical installation is in compliance with all
national and local electrical codes and ordinances. The
dishwasher is designed for an electrical supply of 120V,
60 Hz, AC, connected to a dishwasher-dedicated, properly
grounded electrical circuit with a fuse or breaker rated 15
or 20 amps.
6
| General | Details |
|---|---|
| Name | GAGGENAU DF480701F Dishwasher |
| Make | Gaggenau |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.51 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Gaggenau DF264101 Dishwasher
GAGGENAU DF271101F Dishwasher
GAGGENAU DF481100 Dishwasher
GAGGENAU 400 Dishwasher
GAGGENAU DF480161F Dishwasher
Gaggenau 9001923384 B Dishwasher
GAGGENAU DF261101 Dishwasher
Gaggenau DF211700 Dishwasher
GAGGENAU DF481100F 400 Series Dishwasher
GAGGENAU 11029813 Fully- Dishwasher
Electrolux FSE52607P Dishwasher
KKT KOLBE DW616FS Dishwasher
BOSCH SMV6HVX01I Integrated Dishwasher
BOSCH SMS2HMI03E Dishwasher
lord D1000 Dishwasher
Whirlpool 400011668910 Dishwasher
FISHER AND PAYKEL DD60SDFHTX9 Tall Single DishDrawer Dishwasher
IKEA FINPUTSAD Dishwasher
FISHER AND PAYKEL DD24ST4NX9 Single DishDrawer Dishwasher
SIEMENS SN65ZX00AE Dishwasher