IKEA FINPUTSAD Integrated Dishwasher
ENGLISH
6
Once installed, packaging waste (plastic, switch installed upstream of the socket in
styrofoam parts etc.) must be stored out of accordance with the wiring rules and the
reach of children - risk of suffocation.
appliance must be earthed in conformity
The appliance must be disconnected from with national electrical safety standards.
the power supply before any installation
Do not use extension leads, multiple
operation - risk of electrical shock. During sockets or adapters. The electrical compo-
installation, make sure the appliance does nents must not be accessible to the user
not damage the power cable - risk of fire or after installation. Do not use the appliance
electrical shock. Only activate the appliance when you are wet or barefoot.
when the installation has been completed.
Do not operate this appliance if it has a dam-
Connect the dishwasher to the water mains aged power cable or plug, if it is not work-
using only new hose sets. The old hose sets ing properly, or if it has been damaged or
should not be reused. All hoses must be dropped.
securely clamped to prevent them coming
loose during operation.
If the supply cord is damaged, it must
be replaced with an identical one by the
All local waterboard regulations must be manufacturer, its service agent or similarly
complied with.
qualified persons in order to avoid a hazard
Water supply pressure 0.05 - 1.0 MPa.
- risk of electrical shock.
The appliance must be placed against the If the fitted plug is not suitable for your sock-
wall or built into furniture to limit the ac- et outlet, contact a qualified technician.
cess to its rearside.
Do not pull the power supply cable. Do not
For dishwashers having ventilation open- immerse the mains cord or plug in water.
ings in the base, the openings must not be Keep the cord away from hot surfaces.
obstructed by a carpet.
ELECTRICAL CONNECTION FOR GREAT
If installing the dishwasher at the end of a
row of units making the side panel acces-
sible, the hinge area must be covered to
avoid risk of injury.
BRITAIN AND IRELAND ONLY
Fuse replacement.
If the mains lead of this appliance is fit-
ted with a BS 1363A 13amp fused plug, to
change a fuse in this type of plug use an
A.S.T.A. approved fuse to BS1362 type and
proceed as follows:
The inlet water temperature depends on
the dishwasher model. If the installed inlet
hose is marked “25°C Max”, the maximum
allowed water temperature is 25°C. For all
other models the maximum allowed water
temperature is 60°C. Do not cut hoses and,
in the case of appliances fitted with a wa-
terstop system, do not immerse the plastic
casing containing the inlet hose in water.
If hoses are not long enough, contact your
local dealer. Make sure the inlet and drain
hoses are kink-free and are not crushed. Be-
fore using the applinace for the first time,
check the water inlet and drain hose for
leaks. Make sure that the four feet are sta-
ble and resting on the floor, adjusting them
as required, and check that the dishwasher
is perfectly levelled using a spirit level.
Use the appliance only when the covers
shown on diagram 19 in the Assembly instruc-
tion are correctly assembled - risk of injury.
1. Remove the fuse cover
A
B
(A) and fuse (B).
2.Fit replacement 13A
fuse into fuse cover.
3.Refit both into plug.
Important:
The fuse cover must be refitted when
changing a fuse and if the fuse cover is lost
the plug must not be used until a correct
replacement is fitted.
Correct replacement are identified by the
colour insert or the colour embossed in
words on the base of the plug.
Replacement fuse covers are available from
your local electrical store.
For the Republic of Ireland only
The information given in respect of Great
Britain will frequently apply, but a third type
of plug and socket is also used, the 2-pin,
side earth type.
ELECTRICAL WARNINGS
The rating plate is on the edge of the dish-
washer door (visible when the door is open).
It must be possible to disconnect the ap-
pliance from the power supply by unplug-
ging it if plug is accessible, or by a multi-pole
Socket outlet / plug (valid for both countries)
If the fitted plug is not suitable for your
socket outlet, please contact After-sales
| General | Details |
|---|---|
| Name | IKEA FINPUTSAD Integrated Dishwasher |
| Make | Ikea |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.64 MB |
(1 votes, average: 5.00 out of 5)
Loading...
IKEA 404.755.53 Medelstor Dishwasher
IKEA 804.621.67 Lagan Dishwasher
IKEA RENGÖRA 204.756.05 Dishwasher
IKEA 9001774317 TORSBODA Dishwasher
IKEA 9001774318 Dishwasher
IKEA SBE8596Z0E DISKAD PROFFSIG Dishwasher
IKEA VILLBODA Dishwasher
IKEA 504.754.25 HYGIENISK Dishwasher
IKEA AA-2412057-2-1 RÅGLANDA Dishwasher
IKEA RANSBERG Dishwasher
BOSH SMD8YCX03G Fully Integrated Dishwasher
FISHER PAYKEL DD24DT4NX9 Built-Under Dishwasher
BOSCH SMV6ZCX02E-39 Dishwasher
Fisher and Paykel DD60DCX7 Dishwasher
Mueller DW-1800 18 in. Black Front Digital Dishwasher
MEIKO UPster U 400 M2 Glass and Dishwasher
IKEA DISKAD Dishwasher
EQUATOR 2240 Control Dishwasher
BOSCH SPV4XMX28E Dishwasher
AEG FSE63657P Dishwasher