IKEA FINPUTSAD Integrated Dishwasher
ENGLISH
10
Foldable flaps with adjustable
position
Unsuitable crockery
• Wooden crockery and cutlery.
The side foldable flaps can be fold or
unfold to optimize the arrangement of
crockery inside the rack.
•
Delicate decorated glasses, artistic handicraft and antique
crockery. Their decorations are not resistant.
• Parts in synthetic material which do not withstand high
temperatures.
• Copper and tin crockery.
• Crockery soiled with ash, wax, lubricating grease or ink.
The colours of glass decorations and aluminium/silver pieces can
change and fade during the washing process. Some types of glass
(e.g. crystal objects) can become opaque after a number of wash
cycles too.
Wine glasses can be placed safely
in the foldable flaps by inserting
the stem of each glass into the
corresponding slots.
Depending on the model:
• to unfold the flaps there is needed
to slide it up and rotate or release it
from the snaps and pull it down.
• to fold the flaps there is needed to
rotate it and slide flaps down or pull
it up and attach flaps to the snaps.
Damage to glass and crockery
• Only use glasses and porcelain guaranteed by the
manufacturer as dishwasher safe.
• Use a delicate detergent suitable for crockery
• Collect glasses and cutlery from the dishwasher as soon as
the wash cycle is over.
Hygiene
Lower rack
To avoid odour and sediment which can be accumulated in the
dishwasher please run a high temperature program at least once
a month. Use a tea spoon of detergent and run it without the
loading to clean your appliance.
For pots, lids, plates, salad bowls,
cutlery etc...
Large plates and lids should ideally
be placed at the sides to avoid
interferences with the spray arm.
The lower rack has tip-up supports
which can be used in a vertical
position when arranging plates or in
a horizontal position (lower) to load
pans and salad bowls easily.
Tips on energy saving
• When the household dishwasher is used according to the
manufacturer’s instructions, washing tableware in a dish-
washer usually consumes less energy and water than hand
dishwashing.
•
In order to maximize dishwasher efficiency it is recommended
to initiate the wash cycle once dishwasher is fully loaded.
Loading the household dishwasher up to the capacity indicated
by the manufacturer will contribute to energy and water savings.
Information on correct loading of tableware can be found in
Loading chapter. In case of partial loading it is recommended
to use dedicated wash options if available (Flexible Wash),
fiilling up only selected racks. Incorrect loading or overloading
the dishwasher may increase resources usage (such as water,
energy and time, as well as increase noise level), reducing
cleaning and drying performance.
(loading example for the lower rack)
• Manual pre-rinsing of tableware items leads to increased
water and energy consumption and is not recommended.
Daily Use
1. Check water connection
7. End of wash cycle
Check that the dishwasher is connected to the water supply
and that the tap is open.
The end of the wash cycle is indicated by beeps and by the
flashing of the wash cycle number on the display. Open the
door and switch off the appliance by pressing the ON/OFF
button.
Wait for a few minutes before removing the crockery - to
avoid burns. Unload the racks, beginning with the lower one.
2. Switch on the dishwasher
Open the door and press the ON/OFF button.
3. Load the racks (see LOADING THE RACKS)
4. Filling the detergent dispenser
(see FILLING THE DETERGENT DISPENSER).
The machine will switch off automatically during certain ex-
tended periods of inactivity, in order to minimise electricity
consumption. If the crockery is only lightly soiled or if it has
been rinsed with water before being placed in the dishwash-
er, reduce the amount of detergent used accordingly.
5. Choose the program and customise the cycle
Select the most appropriate program in accordance with
the type of crockery and its soiling level (see PROGRAMS
DESCRIPTION) by pressing the
Select the desired options (see FUNCTIONS).
6. Start
button.
Modifying a running program
If a wrong program was selected, it is possible to change it, provided
that it has only just begun: open the door, press and hold the ON/OFF
button, the machine will switch off.
Start the wash cycle by pressing START/Pause button (led
is lit) and closing the door within 4 sec. When the program
starts you hear a single beep. If the door was not closed
within 4sec., the alarm sound will be played. In this case,
open the door, press START/Pause button and close the door
again within 4 sec.
Switch the machine back on using the ON/OFF button and select
the new wash cycle and any desired options; Start the wash cycle by
pressing START/Pause button and closing the door within 4 sec.
If it takes more than 4 seconds the appliance automatically pauses
and you must restart the appliance again by repeating the last
operation.
| General | Details |
|---|---|
| Name | IKEA FINPUTSAD Integrated Dishwasher |
| Make | Ikea |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.64 MB |

IKEA 404.755.53 Medelstor Dishwasher

IKEA 804.621.67 Lagan Dishwasher

IKEA RENGÖRA 204.756.05 Dishwasher

IKEA 9001774317 TORSBODA Dishwasher

IKEA 9001774318 Dishwasher

IKEA SBE8596Z0E DISKAD PROFFSIG Dishwasher

IKEA VILLBODA Dishwasher

IKEA 504.754.25 HYGIENISK Dishwasher

IKEA AA-2412057-2-1 RÅGLANDA Dishwasher

IKEA 905.681.49 OSTVEDA Dishwasher

































