INDESIT DI9E 2B10 UK Dishwasher
CARE AND MAINTENANCE
CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS
Regularly clean the filter assembly so that the filters do not clog and that On occasions, food residue may become encrusted onto the spray arms
the waste water flows away correctly. and block the holes used to spray the water. It is therefore recommend-
Using dishwasher with clogged filters or foreign objects inside filtra- ed that you check the arms from time to time and clean them with
tion system or sprayarms may cause unit malfunction resulting in lose a small non-metallic brush.
of performance, noisy work or higher resources usage.
The filter assembly consists of three filters which remove food residues
from the washing water and then recirculate the water.
The dishwasher must not be used without filters or if the filter is
loose.
At least once per month or after each 30 cycles, check the filter assem-
bly and if necessary clean it thoroughly under running water, using
a non-metallic brush and following the instructions below:
1. Turn the cylindrical filter A in an anti-clockwise direction and pull
it out (Fig 1).
2. Remove the cup filter B by exerting a slight pressure on the side
flaps (Fig 2).
3. Slide out the stainless-steel plate filter C (Fig 3).
To remove the upper spray arm, turn the plastic locking ring in a clock-
4. In case you find foreign objects (such as broken glass, porcelain,
wise direction. The upper spray arm should be replaced so that the side
bones, fruit seeds etc.) please remove them carefully.
with the greater number of holes is facing upwards.
5. Inspect the trap and remove any food residues. NEVER REMOVE
the wash-cycle pump protection (black detail) (Fig 4).
1
2
B
A
A
The lower spray arm may be removed by pulling it upwards.
3
4
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently
preventing scale buildup on heater, contributing also to better cleaning
efficiency.
This system regenerates itself with salt, therefore it is required
to refill salt container when empty.
C
Frequency of regeneration depends on water hardness level setting
- regeneration takes place once per 5 Eco cycles with water hardness
level set to 3.
Regeneration process starts in final rinse and finishes in drying phase,
before cycle ends.
After cleaning the filters, re-place the filter assembly and fix it in posi-
tion correctly; this is essential for maintaining the efficient operation
of the dishwasher.
•
•
•
Single regeneration consumes: ~3.5L of water;
Takes up to 5 additional minutes for the cycle;
Consumes below 0.005kWh of energy.
CLEANING THE WATER INLET HOSE
If the water hoses are new or have not been used for an extended peri-
od of time, let the water run to make sure it is clear and free of impuri-
ties before performing the necessary connections. If this precaution is
not taken, the water inlet could become blocked and damage the dish-
washer.
6
| General | Details |
|---|---|
| Name | INDESIT DI9E 2B10 UK Dishwasher |
| Make | INDESIT |
| Language | English |
| Filetype | PDF (Download) |
| File size | 5.88 MB |
(1 votes, average: 5.00 out of 5)
Loading...
INDESIT D2I HL326 Full Size Dishwasher
Indesit D2F HD624 A Separate Dishwasher
Indesit 869991713220 Dishwasher
INDESIT I0F D641A X Free Standing Dishwasher
Indesit I0F D641A Dishwasher
INDESIT DFE 1B19 14 Dishwasher
INDeSIT D2F Dishwasher
INDeSIT D2I HD524 A Dishwasher
INDESIT W11667630 B Dishwasher
InDeSIT IN2FE10CS90S Dishwasher
Bauknecht B7I HF60 Dishwasher
FISHER and PAYKEL DW24UT2I2 Sanitize Integrated Dishwasher
Hotpoint HSFO 3T223 Dishwasher
BOSCH SMS4HKW00G Dishwasher
FRIGIDAIRE FDSP4501SS Tub Dishwasher
Miele PFD 101 Dishwasher
FISHER and PAYKEL DD24DHTI9N Tall Drawer Dishwasher
CANDY CDIH 2L952-80 Dishwasher
Brandt BDJ3434VB Dishwasher
FISHER PAYKEL DD24DTX6PX1 Tall