LG LDFN4542S Dishwasher
INSTALLATION 17
3
Use a Phillips screwdriver to remove 2 screws
a.
3
Slide the water supply line back through the
channel, pulling gently from inside the
cabinet to make sure the line is not kinked,
pinched, stressed or crushed.
Connecting Power
The dishwasher should have a dedicated properly
grounded branch circuit to connect the 3 wire
setup which includes the ground wire.
If a 3-prong power supply is used, it should be in
an accessible location adjacent to the dishwasher
within 4 ft. (1.22 m) of the dishwasher side and not
behind the dishwasher.
4
Remove the junction box from the appliance.
NOTE
• The best location for the electrical conduit is on
the right side of the back wall. Re-route the
electrical cable before installation if the electrical
conduit pipe is longer than 3” (76 mm) and is
centered on the back wall.
5
Insert a 3/8” strain relief b through the hole
in the junction box. Tighten the ring nut c to
secure it in place.
1
2
Turn off electrical power to the unit at the
circuit breaker.
Use a Phillips screwdriver to remove the
screw from the junction box cover and
remove the cover.
6
Insert the electrical cable through the hole in
the strain relief. Tighten 2 screws to secure
the cable.
| General | Details |
|---|---|
| Name | LG LDFN4542S Dishwasher |
| Make | LG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.33 MB |

LG LDTH7972SS Black Dishwasher

LG SDWB24S3 STUDIO Smart Dishwasher

LG LDTH7972D Smart Tub Dishwasher

LG LDPH7972D Smart Dishwasher

LG XD3A25UMB 15 Place QuadWash Dishwasher

LG LDT779 Dishwasher

LG LDT7808BD Dishwasher

LG DFB424 Dishwasher

LG LDTS5552D PrintProof Black Dishwasher

LG LDPH7972S Smart Dishwasher




































































