Home > LG > LG LDT779 Dishwasher

LG LDT779 Dishwasher

12 INSTALLATION  
• To ensure proper drainage, install the  
dishwasher no more than 12 ft. (3.65 m) from  
the sink.  
WARNING  
• Installation damage is not covered by the  
warranty, and leaks caused by improper  
installation may result in property damage.  
• The location must have sufficient space for the  
dishwasher door to open easily and provide at  
least 0.1” (2 mm) between the dishwasher and  
the cabinet sides.  
• Do not use existing holes unless they are in the  
target area.  
• If installing the dishwasher in a corner, leave a  
minimum of 2” (50 mm) between the dishwasher  
and the adjacent wall.  
• Failure to properly locate the hole for the water  
and drain lines may prevent the dishwasher  
from installing flush with the cabinets and could  
result in kinked, pinched, crushed, stressed or  
damaged lines.  
• The adjacent wall must be free of obstructions.  
• For flush installations only, you may remove the  
cabinet brace a inside the cabinet.  
Preparing Water and  
Electrical Connections  
Choosing the Proper Location  
WARNING  
• Water Connection  
1
Select a location as close to the sink as  
possible for easy connections to water supply  
line, drain hose and electrical connection.  
- Do not reuse an old hose. Use only a new hose  
when installing the dishwasher. The old hose  
could leak or burst causing flooding and  
property damage. Contact an LG Customer  
Information Center for assistance in buying a  
new hose.  
• Electrical Connection  
- Use a time-delay fuse or circuit breaker.  
- Operate this appliance with the correct voltage  
as shown in this manual and on the rating  
plate.  
- The wiring must be grounded properly. If in  
doubt, have it checked by a qualified  
electrician.  
2
To allow for proper clearance of plumbing  
and electrical, use the template included with  
the literature to determine the clearance on  
the side of the cabinet where the cabinet  
meets the back wall. Using a 2 1/2” diameter  
hole saw, drill a hole in the target area as  
shown on the template.  
- Connect the appliance using 3-wires, including  
a ground wire.  
- The appliance and outlet must be positioned  
so that the plug is easily accessible.  
- Do not use an extension cable or adapter with  
this dishwasher.  
- Do not overload the outlet with more than one  
appliance.  
3.5 ''  
2.5 ''  
- The included 16AWG wire nuts should be used.  
4
''  
GeneralDetails
NameLG LDT779 Dishwasher
MakeLG
LanguageEnglish
FiletypePDF (Download)
File size9.47 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
LG LDTH7972SS Black Dishwasher
LG LDTH7972SS Black Dishwasher
LG SDWB24S3 STUDIO Smart Dishwasher
LG SDWB24S3 STUDIO Smart Dishwasher
LG LDTH7972D Smart Tub Dishwasher
LG LDTH7972D Smart Tub Dishwasher
LG LDPH7972D Smart Dishwasher
LG LDPH7972D Smart Dishwasher
LG XD3A25UMB 15 Place QuadWash Dishwasher
LG XD3A25UMB 15 Place QuadWash Dishwasher
LG LDT7808BD Dishwasher
LG LDT7808BD Dishwasher
LG LDFN4542S Dishwasher
LG LDFN4542S Dishwasher
LG DFB424 Dishwasher
LG DFB424 Dishwasher
LG LDTS5552D PrintProof Black Dishwasher
LG LDTS5552D PrintProof Black Dishwasher
LG LDPH7972S Smart Dishwasher
LG LDPH7972S Smart Dishwasher

LG LDT779 Dishwasher