Home > Miele > Miele HG07 Dishwasher

Miele HG07 Dishwasher

Warnings and safety instructions  
The dishwasher must not be installed underneath a cooktop. The  
high temperatures radiated by cooktops could damage the  
dishwasher below. For the same reason, the dishwasher must not be  
installed next to open fires or other appliances that give off heat, such  
as heaters etc., not normally found in a kitchen.  
Ensure that the connection data on the dishwasher’s data plate  
(fuse rating, frequency, and voltage) match the domestic electricity  
supply. This data must correspond in order to avoid the risk of  
damage to the dishwasher. Compare these before connecting the  
appliance to the electricity supply. If in any doubt, consult a qualified  
electrician.  
Do not connect the dishwasher to the domestic electricity supply  
until it has been fully installed and any adjustments have been made  
to the door springs.  
The dishwasher may only be operated if the door opening  
mechanism is working correctly. Otherwise there could be a risk of  
danger while the automatic door opening mechanism (depending on  
the model) is active.  
To check that the door opening mechanism is working correctly:  
- The door springs must be evenly adjusted on both sides. They are  
correctly adjusted when the door remains stationary when left half  
open (approx. 45° opening angle). It is also important that the door  
cannot fall open.  
- The door locking pins automatically retract when the door opens at  
the end of the drying phase.  
Multi-socket adapters and extension leads do not guarantee the  
required safety of the appliance (risk of fire). Do not connect the  
dishwasher to the domestic electricity supply using a power bar or an  
extension cord.  
The dishwasher must not be used in a non-stationary location  
(e.g., on a ship).  
Do not install the dishwasher in a room where there is a risk of  
frost. Frozen hoses are at risk of tearing or bursting. The reliability of  
the electronic control unit may be impaired at temperatures below  
freezing point.  
To avoid any damage to the dishwasher, it must only be operated  
when it is connected to a fully vented plumbing system.  
9
GeneralDetails
NameMiele HG07 Dishwasher
MakeMiele
LanguageEnglish
FiletypePDF (Download)
File size2.17 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Miele PFD 103 SCi XXL XXL Dishwasher
Miele PFD 103 SCi XXL XXL Dishwasher
Miele PFD 101 i Dishwasher
Miele PFD 101 i Dishwasher
Miele AK-CC 550A APFD 102 Dishwasher
Miele AK-CC 550A APFD 102 Dishwasher
Miele PFD 102 APFD 102 Dishwasher
Miele PFD 102 APFD 102 Dishwasher
Miele 11 836 740 Dishwasher
Miele 11 836 740 Dishwasher
Miele PFD 401 U Commercial Dishwasher
Miele PFD 401 U Commercial Dishwasher
Miele PLW 8683 Laboratory Dishwasher
Miele PLW 8683 Laboratory Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
Miele 12 668 930 Dishwasher
Miele 12 668 930 Dishwasher
Miele PFD 102 i Dishwasher
Miele PFD 102 i Dishwasher

Miele HG07 Dishwasher