Home > Monsher > Monsher MD 4502 Dishwasher

Monsher MD 4502 Dishwasher

56  
English  
Please follow the steps below for adding dishwasher salt:  
1. Remove the lower basket and unscrew the reservoir cap.  
2. Place the end of the funnel (supplied) into the hole and pour in about 1.5kg of  
dishwasher salt.  
3. Fill the salt container to its maximum limit with water, It is normal for a small  
amount of water to come out of the salt container.  
4. After filling the container, screw back the cap tightly.  
5. The salt warning light will stop being after the salt container has been filled  
with salt.  
6. Immediately after filling the salt into the salt container, a washing program  
should be started (We suggest to use a short program). Otherwise the filter  
system, pump or other important parts of the machine may be damaged by salty  
water. This is out of warranty.  
NOTE:  
; The salt container must only be refilled when the salt warning light  
(
) in the control panel comes on. Depending on how well the salt dissolves,  
the salt warning light may still be on even though the salt container is filled.  
If there is no salt warning light in the control panel (for some Models), you can  
estimate when to fill the salt into the softener by the cycles that the dishwasher  
has run.  
; If salt has spilled, run a soak or quick program to remove it.  
GeneralDetails
NameMonsher MD 4502 Dishwasher
MakeMonsher
LanguageEnglish
FiletypePDF (Download)
File size12 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Monsher MD 6003 Dishwasher
Monsher MD 6003 Dishwasher
Monsher MD 6001 Dishwasher
Monsher MD 6001 Dishwasher

Monsher MD 4502 Dishwasher