Indesit I3B L634 B Dishwasher

1

2

3

4

5

6

7

8

Quick Guide  

EN  

THANK YOU FOR BUYING AN INDESIT PRODUCT.  

In order to receive a more complete assistance, please register  

your appliance on: www.indesit.com/register  

PLEASE SCAN THE QR CODE ON YOUR  

APPLIANCE IN ORDER TO HAVE MORE  

DETAILED INFORMATION  

Before using the appliance carefully read Safety Instructions  

guide.  

CONTROL PANEL  

1. On-Off/Reset button with indicator 7. Delay indicator light  

light  

8. Delay button with indicator  

light  

9. Push&GO button with indi-  

cator light  

10. Start/Pause button with  

indicator light / Drain out  

2. Program selection button with  

indicator light  

3. Half Load button with indicator light  

4. Rinse Aid refill indicator light  

5. Salt refill indicator light  

6. Program indicator lights  

1

2

3

4

5

6

7

8

9

10  

FIRST TIME USE  

FILLING THE SALT RESERVOIR  

FILLING THE DETERGENT DISPENSER  

The use of salt prevents the formation of LIMESCALE on the dishes and on To open the detergent dispenser use the opening device C. Introduce the  

the machine’s functional components.  

It is mandatory that the salt reservoir never be empty.  

It is important to set the water hardness.  

The salt reservoir is located in the lower part of the dishwasher and must be tion or damage to the appliance.  

filled when the SALT REFILL indicator light in the control panel is lit.  

detergent into the dry dispenser D only. Place the amount of detergent for  

pre-washing directly inside the tub.  

Usage of detergent not designed for dishwashers may cause malfunc-  

•

•

WATER SOFTENING SYSTEM  

1. Remove the lower rack and unscrew the reservoir cap  

(anticlockwise).  

2. Position the funnel (see figure) and fill the salt reservoir  

right up to its edge (approximately 1 kg); it is not unu-  

sual for a little water to leak out.  

3. Only the first time you do this: fill the salt reservoir  

with water.  

Water softener automatically reduces water hardness, consequently pre-  

venting scale buildup on heater, contributing also to better cleaning effi-  

ciency. This system regenerates itself with salt, therefore it is required  

to refill salt container when empty.  

Frequency of regeneration depends on water hardness level setting - regen-  

eration takes place once per 6 Eco cycles with water hardness level set to 3.  

Regeneration process starts in final rinse and finishes in drying phase, be-  

fore cycle ends.  

4. Remove the funnel and wipe any salt residue away from the opening.  

Make sure the cap is screwed on tightly, so that no detergent can get into the  

container during the wash program (this could damage the water softener be-  

yond repair). Whenever you need to add salt, it is mandatory to complete the  

procedure before the beginning of the washing cycle to avoid corrosion.  

•

•

•

Single regeneration consumes: ~3.5L of water;  

Takes up to 5 additional minutes for the cycle;  

Consumes below 0.005kWh of energy.  

FILLING THE RINSE AID DISPENSER  

Rinse aid makes dish DRYING easier. The rinse  

aid dispenser A should be filled when the RINSE  

D

AID REFILL indicator light in the control pan-  

C

el is lit. NEVER pour the rinse aid directly into the  

appliance tub.  

A

PROGRAMS TABLE  

Duration  

Water  

Energy  

Available  

options ^*)  

of wash  

program  

(h:min)^**)  

Program  

Programs description  

consumption consumption  

(litres/cycle) (kWh/cycle)  

Eco 50° - Eco program is suitable to clean normally soiled tableware. that  

for this use. it is the most efficient program in terms of its combined ener-  

gy and water consumption. and that it is used to assess compliance with  

the EU Ecodesign legislation.  

3:10  

9.5  

0.85  

1.  

Intensive 65° - Program recommended for heavily soiled crockery. espe-  

cially suitable for pans and saucepans (not to be used for delicate items).  

2:50  

3:00  

17.0  

15.0  

1.60  

1.40  

2.  

3.  

Mixed 55° - Mixed soil. For normally soiled dishes with dried food residues.  

Fast&Clean 28’ 45° - Program to be used for half load of lightly-soiled  

dishes with no dried food residues. Does not have drying phase.  

0:28  

0:12  

1:25  

9.0  

4.5  

0.50  

0.01  

1.10  

4.  

5.  

6.  

-

-

Pre-Wash - Use to refresh crockery planned to be washed later. No deter-  

gent to be used with this program.  

-

Push&Go 50° - Everyday wash and dry cycle that ensures great cleaning  

performance in a short time without the need to pre-treat dishes.  

11.5  

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020. Note for Test Laboratories: For information on  

comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com  

Pre-treatment of the dishes is not needed before any of the programs.  

*) Not all options can be used simultaneously.  

**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and  

pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-  

bration. The sensor calibration can increase program duration up to 20 min.  

1

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Indesit I3B L634 B Dishwasher
Make	INDESIT
Language	English
Filetype	PDF (Download)
File size	8.21 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• INDESIT

Indesit I3B L634 B Dishwasher Overview

Summary of Contents

• Page 1: Thank you for buying an Indesit product. In order to receive more complete assistance, please register your appliance. Before using the appliance, carefully read the safety instructions guide. The salt reservoir prevents the formation of limescale on the dishes and the machine’s functional components. It is mandatory that the salt reservoir never be empty. Rinse aid makes dish drying easier. The rinse aid dispenser should be filled when the rinse aid refill indicator light is lit. Eco program is suitable to clean normally soiled tableware and is the most efficient program in terms of energy and water consumption. Program recommended for heavily soiled crockery is the intensive program. Pre-wash is used to refresh crockery planned to be washed later.
• Page 2: Quick guide provides a QR code for detailed information. Options can be selected directly by pressing the corresponding button. If an option is not compatible with the selected program, the corresponding LED flashes rapidly and beeps. Half load option saves water, electricity, and detergent. Push&GO button allows direct access to a wash and dry cycle. Delay function can set the start time of the program by 2, 4, or 8 hours. Auto door opens during/after drying for exceptional performance. Capacity is 14 standard place-settings. Cleaning the filter assembly and spray arms is essential for maintenance. Troubleshooting includes checking water supply and ensuring hoses are not bent or clogged.
• Page 3: Stručný návod Děkujeme vám, že jste si zakoupili výrobek značky Indesit. Před použitím spotřebiče si pečlivě přečtěte bezpečnostní pokyny. Ovládací panel obsahuje tlačítka pro zapnutí, volbu programu, odložený start a další funkce. Zásobník na sůl nesmí nikdy zůstat prázdný. Nastavení tvrdosti vody je důležité pro prevenci usazování vodního kamene. Použití soli vede k předcházení usazování vodního kamene na nádobí a funkčních součástech myčky. Doplnění dávkovače leštidla je nutné, když se rozsvítí kontrolka „nedostatek leštidla“. Úsporný program je vhodný k mytí běžně zašpiněného nádobí a je energeticky nejvýhodnější. Program doporučený pro velmi špinavé nádobí je intenzivní program při 65°. Push&GO je každodenní mycí a sušicí cyklus, který zajišťuje vynikající účinnost mytí v krátkém čase.
• Page 4: Stručný návod Pro získání podrobnějších informací naskenujte QR kód na vašem spotřebiči. Možnosti a funkce Možnosti lze volit přímo stiskem příslušného tlačítka. Není-li možnost kompatibilní se zvoleným programem, příslušná kontrolka třikrát rychle zabliká a ozve se zvukové znamení. Položka polo-viční náplně lze použít k úspoře spotřeby vody, elektřiny a mycího prostředku. Tlačítko Push&GO umožní přímý přístup k programu, který zajistí vynikající účinnost mytí v krátkém čase. Čas spuštění programu lze odložit o 2, 4 nebo 8 hodin. Auto door se automaticky otevírá během/po ukončení fáze sušení. Kapacita: 14 standardních jídelních souprav. Čistění sestavy filtru a ostřikovacích ramen je důležité pro správnou funkci myčky. Pokud naleznete cizí předměty, opatrně je odstraňte. Zkontrolujte, zda je v potrubí voda a zda je otevřený přívodní ventil.
• Page 5: Guida Rapida Grazie per aver acquistato un prodotto Indesit. Prima di utilizzare l’apparecchio, leggere attentamente le istruzioni per la sicurezza. Pannello comandi include tasti per accensione, selezione programmi, e avvio ritardato. Rifornimento del serbatoio del sale previene la formazione di calcare. Riempimento del distributore brillantante facilita il processo di asciugatura delle stoviglie. Il serbatoio del sale deve essere sempre rifornito quando la spia è illuminata. Sistema di addolcimento dell'acqua riduce la durezza e migliora l'efficienza di lavaggio. Ogni rigenerazione del sistema di addolcimento comporta un consumo di circa 3,5 litri d'acqua. Tabella dei programmi include descrizioni e consumi di acqua ed energia per ogni ciclo. Il programma Eco è il più efficiente per stoviglie mediamente sporche.
• Page 6: Guida rapida Scansionare il codice QR sull’apparecchio per visualizzare informazioni più dettagliate. Opzioni e funzioni È possibile selezionare le varie opzioni premendo direttamente il tasto corrispondente. In caso di opzione non compatibile con il programma selezionato, il LED corrispondente lampeggia 3 volte in rapida successione. Mezzo carico - Per limitare il consumo di acqua, elettricità e detersivo si può utilizzare il programma Mezzo Carico. Push&Go - Questo tasto permette di accedere direttamente al programma Push&GO, un ciclo di lavaggio e asciugatura che assicura ottimi risultati in breve tempo. Avvio ritardato - È possibile ritardare l’avvio del programma di 2, 4 oppure 8 ore. Auto door è una funzione di asciugatura a convezione che apre automaticamente la porta durante/dopo la fase di asciugatura. Capienza: 14 coperti standard. Caricamento dei cestelli - Il cestello portaposate deve essere sistemato soltanto nella parte anteriore del cestello inferiore. Pulizia e manutenzione - È possibile smontare l’elemento di protezione del braccio aspersore con attenzione.
• Page 7: Stručný návod Ďakujeme, že ste si kúpili výrobok Indesit. Pred použitím spotrebiča si pozorne prečítajte bezpečnostné pokyny. Ovládací panel obsahuje rôzne tlačidlá a kontrolky pre funkcie umývačky. Prvé použitie zahŕňa plnenie zásobníka soli a dávkovača umývacieho prostriedku. Používanie soli zabraňuje tvorbe vodného kameňa na riadoch. Zmäkčovač vody automaticky znižuje tvrdosť vody a zabraňuje tvorbe vodného kameňa. Dávkovač leštidla treba naplniť, keď na ovládacom paneli svieti kontrolka doplniť leštidlo. Tabuľka programov obsahuje rôzne umývacie programy a ich trvanie, spotrebu vody a energie. Program Eco je najefektívnejší pre bežne zašpinený kuchynský riad. Príprava riadu pred umývaním nie je potrebná pri nijakom programe.
• Page 8: Stručný návod Pre získanie podrobnejších informácií naskenujte QR kód na vašom spotrebiči. Možnosti a funkcie Možnosti si môžete zvoliť priamo stlačením príslušného tlačidla. Ak možnosť nie je kompatibilná so zvoleným programom, 3 razy rýchlo zabliká príslušná LED kontrolka a ozve sa pípanie. Polovičná náplň - Ak je potrebné umyť menej riadu, možno použiť cyklus pre polovičnú náplň. Posunutie štartu - Čas spustenia programu možno odložiť o 2, 4 alebo 8 hodín. Push&Go tlačidlo je ľahko rozoznateľné tlačidlo umožňujúce prístup k programu. Auto door je konvekčný systém sušenia, ktorý automaticky otvorí dvierka počas/po fáze sušenia. Kapacita: 14 štandardných súprav. Ukladanie riadu do košov - Ukladajte doň krehké a ľahké nádoby. Čistenie a údržba - Čistenie zostavy filtra a čistenie ostrekovacích ramien.