PHILCO PD 1466 CBIT Dishwasher
3. Wash the arms in soapy and warm water and
use a soft brush to clean the jets.
Caring For The Dishwasher
Frost precaution
Please take frost protection measures on the dishwasher in winter. Every time after washing cycles, please
operate as follows:
1. Cut off the electrical power to the dishwasher at the supply source.
2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
3. Drain the water from the inlet pipe and water valve. (Use a pan to gather the water)
4. Reconnect the water inlet pipe to the water valve.
5. Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump.
After every wash
After every wash, turn off the water supply to the appliance and leave the door slightly open for a while so
that moisture and odors are not trapped inside.
Remove the plug
Before cleaning or performing maintenance, always remove the plug from the socket.
No solvents or abrasive cleaning
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products.
Only use a cloth with warm soapy water.
To remove spots or stains from the surface of the interior, use a cloth dampened with water an a little vinegar,
or a cleaning product made specifically for dishwashers.
When not in use for a long time
It is recommend that you run a wash cycle with the dishwasher empty and then remove the plug from the
socket, turn off the water supply and leave the door of the appliance slightly open. This will help the door
seals to last longer and prevent odors from forming within the appliance.
EN - 29
Copyright © 2023, Fast ČR, a. s.
Revision 05/2023
| General | Details |
|---|---|
| Name | PHILCO PD 1466 CBIT Dishwasher |
| Make | PHILCO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.69 MB |

PHILCO PD 1045 EA Dishwasher






























































