PHILCO PD 1466 CBIT Dishwasher
Step 4. Dishwasher installation steps
Please refer to the specific installation steps in the installation drawings.
1. Affix the condensation strip under the work surface of cabinet. Please ensure the condensation strip is
flush with edge of work surface. (Step 2)
2. Connect the inlet hose to the cold water supply.
3. Connect the drain hose.
4. Connect the power cord.
5. Place the dishwasher into the cabinet.
6. Level the dishwasher. The rear foot can be adjusted from the front of the dishwasher by turning the
Philips screw in the middle of the base of dishwasher use Philips screw driver. To adjust the front feet, use
a flat screw driver and turn the front feet until the dishwasher is level. (Step 5 to Step 6)
7. Install the furniture door to the outer door of the dishwasher. (Step 7 to Step 10)
8. Adjust the tension of the door springs by using a Philips screw driver turning in a clockwise motion to
tighten the left and right door springs. Failure to do this could cause damage to your dishwasher. (Step
11)
9. The dishwasher must be secured in place. There are two ways to do this:
A. Normal work surface: Put the installation hook into the slot of the side plane and secure it to the work
surface with the screws.
B. Marble or granite work top: Fix the side with screws.
A
B
EN - 37
Copyright © 2023, Fast ČR, a. s.
Revision 05/2023
| General | Details |
|---|---|
| Name | PHILCO PD 1466 CBIT Dishwasher |
| Make | PHILCO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.69 MB |
(1 votes, average: 5.00 out of 5)
Loading...
PHILCO PD 1045 EA Dishwasher
BLACK PLUS DECKER BDW200MW Dishwasher
Hotpoint 869991662940 Dishwasher
FISHER PAYKEL DD24STX6PX1 Sanitize DishDrawer Dishwasher
Everglades Witgoed EVDW5111B Dishwasher
BOSCH SMD8YCX01G Fully- Dishwasher
FISHER PAYKEL DD24DCTB9_N Tall Sanitize Dishwasher
FISHER PAYKEL DOOR DD60ST Door Panel Tall Dishwasher
VALBERG 14S40 B WAD929C Dishwasher
FISHER and PAYKEL DW24U2I1 Dishwasher
BOSCH SBV6ECX00E/38 Dishwasher