PHILCO PD 1466 CBIT Dishwasher
Connection Of Drain Hoses
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run into the sink, making
sure to avoid bending or crimping it. The height of drain pipe must be less than 1000 mm. The free end of the
hose must not be immersed in water to avoid the back flow of it.
Please securely fix the drain hose in either position A or position B
Counter
Drain Pipe
Drain Pipe
Back of dishwasher
A
Drain hose
B
40 mm
Water Inlet
Drain Pipe
Mains Cable
How to drain excess water from hoses
If the connection to the drain pipe is positioned higher than 1000 mm, excess water may remain in the drain
hose. It will be necessary to drain excess water from the hose into a bowl or suitable container that is held
outside and lower than the sink.
Water outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks. Ensure that the
water drain hose is not kinked or squashed.
Extension hose
If you need a drain hose extension, make sure to use a similar drain hose.
It must not be longer than 4 meters, otherwise the cleaning effect of the dishwasher could be reduced.
Syphon connection
The waste connection must be at a height less than 1000 mm (maximum) from the bottom of the dishwasher.
Positioning The Appliance
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides,
along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can
be positioned either to the right or the left sides to facilitate proper installation.
EN - 33
Copyright © 2023, Fast ČR, a. s.
Revision 05/2023
| General | Details |
|---|---|
| Name | PHILCO PD 1466 CBIT Dishwasher |
| Make | PHILCO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.69 MB |

PHILCO PD 1045 EA Dishwasher






























































